Airbag control unit with part number 95517626

What is the function of Airbag Control Unit 95517626?

The airbag control unit with part number 95517626 is the central control module for the passive safety system in the Opel Movano B. As an original Opel part, it processes signals from crash sensors and, in the event of a collision, precisely and promptly deploys the airbags and seatbelt pretensioners.

This component continuously monitors all connected SRS components (Supplemental Restraint System), such as front and side airbags, seatbelt pretensioners, and seat occupancy detection. It ensures that the entire system operates flawlessly in an emergency.

In case of a malfunction or after an accident, the unit stores fault codes or locks itself to prevent unintended deployment. A professional repair restores full functionality and guarantees the safety of vehicle occupants.

Why does Airbag Control Unit 95517626 fail?

A common reason for failure of control unit 95517626 is the storage of crash data after an accident, which results in the unit being locked. Other causes include electronic malfunctions, water damage, or defects in wiring and connectors to the vehicle that prevent proper operation.

During diagnosis, external sources of error are often identified, such as broken or improperly routed cables between the control unit and other SRS components. Loose or corroded connectors can also lead to communication issues and malfunctions.

Internal defects are another frequent cause. These particularly include damage caused by water ingress, leading to corrosion on the circuit board, or general electronic malfunctions affecting components within the control unit.

After an accident, crash data is permanently stored in the control unit’s memory. This is a safety measure designed to prevent reuse without proper inspection. Specialized services can erase this data and reset the unit.

It should be noted that for the Opel Movano B, alternative OEM numbers such as 93168337, 93168336, 8200098404, and 1697372080 also exist; these are technically comparable and may exhibit similar fault patterns.

How do you recognize a defect in control unit 95517626?

The most obvious sign of a defect in airbag control unit 95517626 is the SRS warning light in the instrument cluster that remains steadily illuminated or flashes. This indicates a malfunction in the restraint system and requires immediate inspection at a specialized workshop, as the protective function of the airbags is no longer guaranteed.

If the warning light does not briefly illuminate upon starting the vehicle and then extinguish, but instead stays on continuously, an active fault is present. In such cases, the entire airbag system is typically disabled.

Another symptom may be the inability of a diagnostic tool to establish communication with the airbag control unit. The fault memory cannot be read, often pointing to a severe internal defect in the control unit.

In some instances, specific fault codes are stored in the memory, directly indicating an “internal fault” within the control unit. This confirms that the root cause lies not in a sensor or actuator, but in the central unit itself.

In which vehicles is control unit 95517626 installed?

The airbag control unit with part number 95517626 is an original component specifically developed for the Opel Movano B series. At Airbag24, this control unit is professionally repaired for all body variants—including bus, panel van, and tipper—produced between 2010 and 2021.

Compatibility covers the entire production period of the second generation of the Opel Movano. Specifically, the following models and model years are affected:

Opel Movano B (2010–2021)

Repair services at Airbag24 cover not only part number 95517626 but also identical control units with alternative OEM numbers 93168337, 93168336, 8200098404, and 1697372080, which may be installed in the same vehicles.

How is control unit 95517626 professionally repaired?

At Airbag24, control unit 95517626 undergoes a standardized repair process. Following a comprehensive initial analysis, stored crash data is erased, electronic sources of error are eliminated, and defective components are replaced. Final tests ensure full functionality, backed by a 12-month warranty.

After removal from the vehicle, the control unit is sent to Airbag24. There, it first undergoes diagnostics using specialized equipment to precisely locate and verify the fault recorded in the fault memory.

Subsequently, the device is opened and the circuit board is analyzed by experienced technicians. Depending on the cause of the fault, crash data is erased from the internal memory, electronic components are replaced, or solder joints are reworked.

After repair, the control unit is tested on a test bench to ensure it communicates flawlessly again and performs all functions as intended. The repaired unit is then immediately ready for installation and requires no additional programming in the vehicle.

What shipping options does Airbag24 offer?

For repairing your control unit, Airbag24 provides straightforward shipping solutions. You can either send the package yourself at no cost or arrange for UPS to pick it up at your preferred location. Returns are equally flexible, with free standard UPS shipping or faster express service—optionally available with cash-on-delivery.

For sending the unit to us, you have two options: pack the removed control unit securely and ship it yourself, or use the convenient UPS pickup service, which collects the package directly from your home or workshop.

Following successful repair, the control unit is promptly returned to you. Various options are available: free standard UPS shipping, faster UPS express shipping, or both, with the option of cash-on-delivery.

Alternatively, upon prior arrangement, you may drop off your control unit in person and collect it after repair.