Airbag control unit with part number 95900-4A500

What is the function of the airbag control unit 95900-4A500?

The airbag control unit with part number 95900-4A500 is the central control module for the passive safety system in the Hyundai H-1 A1 (1997–2007). It is located in the tunnel area next to the gearshift lever, analyzes data from impact sensors, and determines whether to deploy the airbags and seatbelt pretensioners.

Its primary task is to activate the necessary restraint systems within milliseconds during a crash to protect occupants. The unit is vehicle-specifically locked, meaning that replacement requires professional unlocking (reset) and reprogramming for the target vehicle.

Without this specialized adjustment by qualified technicians, a used control unit cannot function correctly in the new vehicle environment.

Why does the control unit 95900-4A500 fail?

Failures of the 95900-4A500 control unit are most often caused by stored crash data after an accident, which prevents further operation. Other causes include internal electronic defects, frequently triggered by moisture ingress, overvoltage in the vehicle’s electrical system, or natural wear and tear of components.

The most common “malfunction” is the storage of crash data. After a collision, the control unit locks itself for safety reasons and must be professionally reset to become operational again.

Actual hardware defects often result from external factors. Moisture can cause corrosion on the circuit board, while voltage spikes may damage sensitive electronic components such as processors or memory chips.

It is also crucial to verify the exact part number. Confusion with similar numbers like 95910-4A200, 95910-4A500, or 95910-4A301 can lead to incompatibility, even if the units appear identical externally.

How do you recognize a defect in the 95900-4A500?

A defect in the 95900-4A500 control unit primarily manifests as a permanently illuminated or flickering airbag warning light on the instrument cluster. Often, communication with the control unit via a diagnostic tool is no longer possible, and internal fault codes such as B1650 or B1620 are stored.

The most noticeable sign is the active airbag warning light that fails to turn off after starting the engine. This indicates a critical fault in the restraint system, putting occupants’ safety at risk.

In the workshop, the defect often becomes apparent when diagnostic tools can no longer access the airbag control unit. It does not respond to queries, making precise fault analysis difficult.

When fault codes are read, identifiers such as B1650 (crash data stored) or B1620 (internal ECU error) directly point to a problem within the control unit itself. Faults related to insufficient supply voltage (e.g., B1112) may also indicate an internal defect.

In which vehicles is the 95900-4A500 control unit installed?

The airbag control unit 95900-4A500 was specifically developed for the first-generation Hyundai H-1 (A1). It is used in both the original model and the facelifted version and is tailored exclusively for this vehicle series.

At Airbag24, we repair the 95900-4A500 control unit for the following Hyundai H-1 models:

Hyundai H-1 A1 (model years 1997–2003)

Hyundai H-1 A1 Facelift (model years 2003–2007)

How is the 95900-4A500 professionally repaired at Airbag24?

At Airbag24, the 95900-4A500 control unit undergoes a professional repair process. Following an initial diagnosis, stored crash data is erased or internal hardware defects are fixed at the component level, depending on the nature of the issue. A final functional test ensures quality, backed by a 12-month warranty.

Upon receiving the control unit at Airbag24, our technicians perform a comprehensive diagnosis to identify the exact cause of the failure. Stored fault codes such as B1650 or B1620 are analyzed during this process.

The core of the repair involves either carefully resetting the stored crash data or restoring the electronics. Defective components damaged by moisture or overvoltage are expertly desoldered and replaced with new, specification‑compliant parts.

After successful repair, the control unit is tested on a bench to verify proper functionality across all system areas. We provide a 12-month warranty on every completed repair.

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping options. You can send your defective control unit free of charge yourself, or conveniently arrange for UPS to pick it up at your preferred location. For returns, we offer free standard UPS shipping as well as faster express options, including cash-on-delivery.

For returning your removed control unit, you have two options: ship it yourself or use our convenient, bookable UPS pickup service directly from your address.

After repair, we will ship the unit back to you free of charge via standard UPS delivery as a default option.

If you need the part sooner, you can opt for UPS Express shipping at an additional cost. Both shipping methods can also be arranged with cash-on-delivery. Personal collection at our workshop is another option as well.