Airbag control unit with part number 95910-0X000

What is the function of Airbag Control Unit 95910-0X000?

The airbag control unit with part number 95910-0X000 is the central control module for the occupant protection system, primarily installed in the second-generation Hyundai i10 (IA). It analyzes data from the acceleration sensors and determines whether and when airbags and seatbelt pretensioners should be deployed.

As the “brain” of the safety system, this module is responsible for monitoring all relevant components. It maintains continuous communication with the crash sensors located at the front and sides of the vehicle, as well as with individual airbag modules and seatbelt pretensioners.

The part number 95910-0X000 often serves as a placeholder for an entire family of variants, such as 959100X000 or 95910-0X100, which are technically very similar and used across different trims of the Hyundai i10.

Why does control unit 95910-0X000 fail?

The most common cause of failure is the storage of crash data after an accident, which permanently locks the control unit. In addition, internal defects in electronic components—often triggered by moisture or voltage spikes—can lead to complete failure, resulting in error code B1620 or loss of diagnostic communication.

Even after a collision, if only one seatbelt pretensioner has been activated, the control unit writes an irreversible crash record into its internal memory. This safety measure prevents reuse but necessitates repair via a reset procedure.

Hardware defects on the circuit board are another frequent cause. Faulty microcontrollers, capacitors, or other electronic components can be damaged due to aging, vibrations, or ingress of moisture. Improper jump-starting with incorrect voltage can also destroy sensitive parts.

How do you recognize a defect in 95910-0X000?

A defect in control unit 95910-0X000 primarily manifests as a continuously illuminated airbag warning light on the instrument cluster. Often, it also becomes impossible to access the control unit via a diagnostic tool to read or clear fault codes.

The most noticeable sign is the red airbag warning lamp, which fails to turn off after starting the engine, indicating a serious, safety-critical system error. The fault memory frequently stores error code B1620 (internal control unit error).

Another clear symptom is the complete loss of communication: the workshop cannot establish a connection between the diagnostic tool and the airbag control unit. The module does not respond to requests over the OBD interface, making precise fault analysis impossible.

Even when communication is possible, fault codes—especially following an accident—cannot be cleared. The system continues to report an active fault because stored crash data blocks normal operation.

In which vehicles is control unit 95910-0X000 installed?

The airbag control unit 95910-0X000 is specifically used in the second generation of the Hyundai i10, covering both pre-facelift models and revised versions, spanning approximately six years of production.

At Airbag24, we repair control unit 95910-0X000 and its variants for the following models:

Hyundai: i10 IA (model years 2013–2016), i10 IA Facelift (model years 2017–2019)

What are the advantages of repair over a new part?

Repair offers an economically and technically superior alternative to costly replacement. Not only do you save significantly, but you also receive a plug-and-play solution that requires no complex coding and comes with a 12-month warranty.

A new part often costs several hundred euros, whereas repair can save up to 70%. This makes refurbishment the most cost-effective way to restore full vehicle safety.

Since your original control unit is repaired, all vehicle-specific data remains intact. After installation, no additional programming or coding is required at a specialized workshop—the unit is immediately fully functional again.

How does repair work at Airbag24?

Airbag24’s repair process is designed as a straightforward mail-in service. After removal, simply send us the defective control unit. Our technicians perform a precise diagnosis, fix the defect at the component level, and reset any stored crash data.

First, the control unit must be professionally removed at a workshop. Then, pack it securely and send it to Airbag24 along with the completed repair order.

Upon receipt of the unit, a detailed technical inspection will be performed to identify any faults. The repair includes erasing crash data and, if necessary, replacing defective electronic components such as microcontrollers or capacitors on the circuit board.

Following this, the repaired control unit undergoes a comprehensive functional test to ensure proper operation. We provide a 12-month warranty on every repair.

What shipping options are available?

Airbag24 offers you maximum flexibility when it comes to shipping. You can either return the package yourself free of charge or arrange for a convenient UPS pickup. Returns are shipped free of charge via UPS by default, with express and cash-on-delivery options also available.

For the outbound shipment, you have two choices: drop off the package yourself or use our UPS pickup service from your preferred address.

For returning the repaired control unit, we offer the following options: free standard UPS shipping, faster UPS express shipping, and both options available with cash-on-delivery. In-person collection at our facility is also possible.