Airbag control unit with part number 95910-0X110

What is the function of the airbag control unit 95910-0X110?

The airbag control unit 95910-0X110 is the central control module for the occupant restraint system (SRS) in the Hyundai Xcent BA (model years 2014–2022). It is responsible for analyzing signals from impact sensors and, in the event of a crash, precisely and rapidly deploying airbags and seatbelt pretensioners.

As an SRS module, it continuously monitors all safety‑related components of the restraint system, including sensors, ignition circuits, and the airbag modules themselves. It checks system integrity with every vehicle start.

Its primary task is reliable crash detection and targeted activation of the appropriate safety devices to provide optimal protection for occupants in an emergency. At the same time, it stores all system‑relevant faults and events.

Why does the control unit 95910-0X110 fail?

The most common cause of failure for the control unit 95910-0X110 is the storage of crash data after an accident, which blocks further functionality. In addition, internal electronic errors in the memory (EEPROM/Flash), component defects such as voltage regulators or driver stages, and communication malfunctions can lead to complete system failure.

Following a collision, irreversible crash data is stored in the control unit’s internal memory. This data cannot be erased using standard workshop diagnostic tools and results in the permanent illumination of the SRS warning light, even if the unit itself remains physically undamaged.

Even without an accident, electronic components on the circuit board may fail. These issues often manifest as internal error messages indicating corrupted memory areas or defective ICs, impairing the overall system performance.

The related part numbers for the Hyundai Xcent BA, such as 95910-0X100 and 95910-0X120, belong to the same control unit family and typically exhibit identical fault patterns and repair methods in practice.

How do you recognize a defect in the 95910-0X110?

A defective 95910-0X110 control unit primarily manifests as a permanently illuminated or intermittently flashing airbag warning light (SRS lamp) in the instrument cluster. During diagnostics, error codes such as “Crash data stored,” “Control unit defective,” or “Internal error” are frequently read.

The clearest indication is the persistently active SRS warning light that fails to extinguish after starting the vehicle. This signals a serious malfunction in the safety system that requires immediate inspection by a qualified workshop.

In many cases, communication with the control unit via a diagnostic tool becomes impossible. The tester cannot establish a connection, preventing detailed fault analysis within the vehicle and often pointing to an internal defect.

If error codes appear for individual ignition circuits, side airbags, or seatbelt pretensioners—even though these components are demonstrably intact—the cause is very likely an internal processing error within the control unit itself.

In which vehicles is the 95910-0X110 installed?

The airbag control unit with part number 95910-0X110 is primarily used in Hyundai vehicles. It is specifically assigned to the Hyundai Xcent model of the BA series, produced between approximately 2014 and 2022. Airbag24 offers specialized repair services for this model.

At Airbag24, repair services for the 95910-0X110 control unit are available for the following vehicle model:

Hyundai: Xcent BA (circa 2014–2022)

How does the repair process work at Airbag24?

The repair of the 95910-0X110 control unit at Airbag24 follows a standardized procedure. After removal from the vehicle and submission, the unit undergoes a comprehensive incoming inspection to pinpoint the exact fault. This is followed by electronic refurbishment, including the deletion of crash data.

First, the fault in the vehicle should be diagnosed using an appropriate diagnostic tool. For removing the control unit—typically located centrally in the tunnel or center console—the vehicle battery must be disconnected according to manufacturer guidelines to avoid safety risks.

Upon receipt at Airbag24, technicians analyze the circuit board and read out the internal fault memory. The core repair involves restoring the control unit to factory settings, which includes erasing stored crash data from the internal memory (EEPROM/Flash).

If additional hardware defects are identified during analysis, electronic components such as driver stages or voltage regulators are professionally replaced, and cold solder joints are reworked.

A final functional test on a dedicated test bench ensures that the control unit communicates flawlessly once again and passes all internal self-tests. A 12-month warranty is provided for the completed repair.

What shipping options are available?

To send your defective control unit to Airbag24, you can deliver it in person or ship it free of charge. Alternatively, convenient UPS pickup from a location of your choice is available. For return shipping after repair, flexible options are also offered, including free standard UPS shipping.

Shipping to Airbag24: You can send the carefully packaged control unit to us yourself or bring it in person. For maximum convenience, we also offer UPS pickup at your preferred location.

Return shipping to you: After successful repair, you can choose from various UPS shipping methods. Standard UPS shipping is free of charge.

For faster delivery, you can opt for UPS Express shipping. Both shipping methods are also available with cash-on-delivery. Of course, you can also pick up the repaired unit in person at our premises.