Airbag control unit with part number 95910-0X200

What is the function of the airbag control unit 95910-0X200?

The airbag control unit with part number 95910-0X200 is the central control module for the passive safety system in the first-generation Hyundai i10 (PA). It processes data from crash sensors and, within milliseconds, decides whether to deploy airbags and seatbelt pretensioners to protect occupants in the event of a collision.

As the “brain” of the restraint system, this module continuously monitors all connected components—from the impact sensors at the front of the vehicle to the individual airbag modules and seatbelt pretensioners—ensuring that the system remains fully operational at all times.

If a fault occurs or crash data is stored after an accident, the control unit signals this by illuminating the airbag warning light on the dashboard. A professional diagnosis and repair are then essential to restore full protective functionality.

Why does the control unit 95910-0X200 fail? Typical defects

The most common causes of failure for the 95910-0X200 control unit are permanently stored crash data following an airbag deployment, as well as internal hardware defects on the circuit board. These can block communication or result in persistent error messages that cannot be cleared.

Even after minor collisions where a seatbelt pretensioner or airbag deploys, the device irrevocably stores so‑called crash data. This lockout is intentionally designed by the manufacturer to prevent reuse of the module, even if it appears undamaged electronically.

In addition to accidents, internal electronic damage may also occur. Defective semiconductors, driver ICs, or memory modules on the circuit board are frequent culprits. Sometimes overvoltage, ground issues, or cold solder joints lead to total failure or communication problems.

These failure patterns are typical across the entire Hyundai i10 PA series. Closely related part numbers such as 95910-0X100, 95910-0X150, 95910-0X500, 95910-0X600, and 95910-0X700 often exhibit identical defects.

How do you recognize a defect in the 95910-0X200?

A defective 95910-0X200 airbag control unit primarily manifests as a constantly illuminated airbag warning light on the instrument panel. Additionally, specific diagnostic trouble codes like B1101 or B1620 cannot be cleared using a diagnostic tool, or communication with the control unit may completely break down.

The clearest symptom is the persistently lit airbag warning lamp. It fails to extinguish after starting the vehicle, indicating a serious, stored fault within the system.

During workshop diagnostics, the issue often becomes apparent when the fault memory can be read but the stored errors cannot be erased. Common entries include vehicle‑specific airbag faults or references to stored crash data.

In more severe cases, the control unit becomes inaccessible to diagnostic equipment. Attempts to establish a connection fail, pointing to a critical internal hardware defect—such as problems with the power supply or the communication processor.

In which vehicles is the 95910-0X200 control unit installed?

The airbag control unit with part number 95910-0X200 is specifically designed for the first-generation Hyundai i10 (model PA). Airbag24 offers professional repair services for control units installed in this model, including facelift variants.

At Airbag24, we repair the 95910-0X200 for the following specific models:

Hyundai: i10 PA (model years 2008–2010) and i10 PA facelift (model years 2011–2013).

It’s important to verify whether your vehicle is equipped with one of these related part numbers, which we also service: 95910-0X100, 95910-0X150, 95910-0X500, 95910-0X600, or 95910-0X700. These belong to the same control unit family.

How is the 95910-0X200 professionally repaired?

Professional repair at Airbag24 begins with an initial analysis to precisely identify the fault, followed by targeted restoration. Depending on the defect, crash data is erased or faulty electronic components on the circuit board are replaced. A final test ensures full functionality, backed by a 12-month warranty.

Once the removed control unit arrives at Airbag24, technicians conduct a thorough electrical and functional inspection. This guarantees that the repair is tailored specifically to the identified fault—whether it involves crash data or internal electronic damage.

The core repair process consists either of securely erasing stored crash data from the memory chip or performing component‑level repairs. During this process, defective parts such as semiconductors, memory chips, or other ICs are replaced with new, high‑quality components.

If necessary, data transfer (cloning) is performed to preserve the vehicle-specific configuration and enable a simple plug-and-play installation. After each repair, the control unit is tested on a specialized test bench to verify its functionality as if it were new.

Is repairing the 95910-0X200 worthwhile?

Yes, in most cases, repair is the most economical and intelligent solution. You save between 50 and 70 percent compared to the cost of a new part, help protect the environment by avoiding electronic waste, and retain your vehicle’s original coding, thus preventing additional workshop expenses.

The financial benefit is substantial. A new airbag control unit from the manufacturer is many times more expensive than professional refurbishment. Repair offers cost savings of 50 to 70 percent while delivering identical functionality.

A refurbished original control unit is often the best choice because it preserves the vehicle-specific coding. This typically eliminates the need for time-consuming and costly reprogramming at the workshop—something required when using a new part or a used unit from another vehicle.

Moreover, repair is a sustainable choice. It actively contributes to resource conservation and reduces electronic waste. Of course, every repaired unit comes with a 12-month warranty.

What shipping options does Airbag24 offer?

For hassle-free processing, you can send your defective control unit to Airbag24 free of charge or arrange convenient UPS pickup from your preferred location. Returns are also free via standard UPS, with express and cash-on-delivery options available.

For sending your removed control unit to us, you can choose either free self‑shipping or the convenient UPS pickup service, which collects the package directly from your address.

After successful repair, we ship the unit back to you free of charge via standard UPS. If you need faster delivery, you can select UPS Express shipping.

Both standard and express shipping can be combined with cash-on-delivery. Alternatively, you may opt to pick up your control unit in person at our facility.