Airbag control unit with part number 95910-0X600

What is the function of the airbag control unit 95910-0X600?

The airbag control unit with part number 95910-0X600 is the central control module for the passive safety system in the Hyundai i10. It continuously analyzes data from the acceleration sensors to precisely and rapidly deploy the airbags and seatbelt pretensioners in the event of a crash, thereby protecting the occupants.

As the “brain” of the restraint system, this module communicates with all relevant components—from the crash sensors located at the front and sides of the vehicle to the individual ignition circuits of the airbags and seatbelt pretensioners.

Proper functioning of this control unit is critical for vehicle safety, as any malfunction disables the entire airbag system, which is indicated by the warning light on the dashboard.

Why does the airbag control unit 95910-0X600 fail?

The most common cause of failure for the 95910-0X600 control unit is the storage of crash data after an accident, resulting in permanent system lockout. In addition, internal electronic faults—such as data corruption in memory (EEPROM/Flash) due to voltage drops or defective hardware components—can also lead to failure.

Following a collision, even minor ones, an irreversible “Crash Data Stored” entry remains in the internal memory. This entry blocks the control unit’s functionality and must be reset through specialized electronic repair.

Electronic causes are also prevalent. These include damaged microcontrollers or memory chips caused by overvoltage, faulty driver stages for the ignition circuits, or failures in the internal power supply due to defective voltage regulators.

External factors such as moisture can also cause corrosion on the circuit board, damaging traces and solder joints and leading to sporadic or permanent malfunctions.

How do you recognize a fault in the 95910-0X600?

A defective airbag control unit 95910-0X600 primarily manifests as a permanently or intermittently illuminated airbag warning light on the instrument panel. Often, the error code stored in the fault memory cannot be cleared—even with a diagnostic tool—or the control unit becomes completely inaccessible.

The most obvious sign is the red airbag indicator light that fails to turn off after the engine starts. This indicates a critical fault in the restraint system that requires immediate inspection.

Another clear symptom is when a read-out error code cannot be permanently erased. Even after attempting to clear it, the fault reappears immediately—often following an accident or issues with the vehicle battery.

In some cases, communication with the control unit is no longer possible. The diagnostic tool cannot establish a connection, suggesting a severe internal defect. Error codes such as B1620 (internal fault) are also indicative in similar Hyundai models.

In which vehicles is the 95910-0X600 installed?

The airbag control unit with part number 95910-0X600 is specifically used in Hyundai vehicles. It is primarily installed in the Hyundai i10 compact car series, covering the PA generation (circa 2007–2013) as well as the subsequent IA generation and its facelift (circa 2013–2019).

At Airbag24, we repair the 95910-0X600 control unit for the following models and generations:

Hyundai: i10 (PA generation, model years circa 2007–2013)

Hyundai: i10 (IA generation, model years circa 2013–2016) and i10 (IA facelift, model years circa 2017–2019)

Due to overlapping model changes, it is crucial to verify the part number printed on the control unit to ensure correct identification.

How is the 95910-0X600 professionally repaired?

Professional repair of the 95910-0X600 involves an initial inspection, reading and backing up the original data, selectively clearing the stored crash data, and repairing any hardware defects. Following a final functional test on the test bench, the control unit is fully operational again.

Upon submission to Airbag24, the control unit undergoes a comprehensive diagnosis. Technicians check communication, analyze the fault memory, and perform a visual inspection for physical damage such as corrosion.

A key step is reading the internal memory (EEPROM/Flash). Vehicle-specific coding is backed up before the crash-data lock is lifted via a software reset. This ensures that, after repair, the control unit functions without requiring re‑learning in the vehicle.

If the diagnosis reveals a hardware defect, defective electronic components—such as voltage regulators, driver ICs, or memory chips—are expertly replaced. Should the housing be irreparable, the original data can be cloned onto a compatible replacement unit.

Each repair is completed with a thorough final test to ensure flawless functionality. We offer a 12-month warranty on all repairs.

What are the benefits of repair?

Repairing the airbag control unit 95910-0X600 is the most economically and technically sensible solution. Compared to purchasing an expensive new part, you save several hundred euros and retain the original vehicle-specific coding, eliminating the need for time-consuming reprogramming at the workshop.

The biggest advantage is the significant cost savings. A new airbag control unit from the manufacturer can cost €700–€800 or more. Repair is considerably cheaper while restoring full functionality.

Since the original data of the control unit is preserved during the process, the repaired unit is ready to use immediately after reinstallation (“plug-and-play”). No re-coding or programming specific to your vehicle is required.

You receive a professionally refurbished original part that has been thoroughly tested for proper function. This is often more reliable than installing a used control unit with an unknown history. Additionally, repair helps conserve valuable resources.

What shipping options are available at Airbag24?

You can easily and securely send your defective control unit to Airbag24. For the outbound shipment, you can either drop it off yourself free of charge or arrange a convenient UPS pickup. For the return shipment, we offer free standard UPS shipping as well as faster express and cash-on-delivery options.

There are two ways to ship your unit to us: Pack the removed control unit securely and send it to us yourself, or arrange a convenient UPS pickup directly from your preferred location—such as your workshop or home.

Once the repair is complete, we’ll promptly ship your control unit back to you. You can choose from the following return shipping options:

Free standard UPS shipping, UPS express shipping for faster delivery, standard UPS shipping with cash-on-delivery, and UPS express shipping with cash-on-delivery.

Alternatively, you can also pick up your repaired control unit in person at our facility.