Airbag control unit with part number 95910-0X700

What does the airbag control unit 95910-0X700 do?

As the central control unit of the restraint system in Hyundai, the airbag control unit 95910-0X700 evaluates the signals from the crash sensors. In an emergency, it decides within fractions of a second whether airbags and seatbelt pretensioners are triggered, and shows faults via the airbag warning light.

The unit monitors the system continuously and checks the connected components. Every deviation is recorded in the fault memory.

After an accident, it creates crash data and locks itself. This data is therefore part of what a workshop finds when it reads out the unit.

Why does the control unit 95910-0X700 fail?

The most common cause is crash data that remains in the unit after an accident, even if no airbag has deployed; a normal diagnostic tool cannot remove it. Other causes include aged components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes, such as from a weak battery or a jump start.

Such entries are not a sign of visible damage. They stay in the unit until Airbag24 erases them during the repair.

Aged electronics and connection problems can occur together with other causes. Whether they caused the failure can only be determined by a check on the unit.

How can you tell that the 95910-0X700 is defective?

A defect shows up as the airbag warning light in the instrument cluster lighting up constantly or intermittently, as a fault message in the instrument cluster, as a lack of connection to the diagnostic tool or as a fault memory that cannot be cleared. In these cases, airbags and seatbelt pretensioners may not trigger in an emergency.

The warning light is the most important sign, because it reports the fault directly in the driver's field of view. A fault message in the instrument cluster is an additional sign.

Which cause lies behind it is determined by reading out the fault memory.

Which vehicles is the 95910-0X700 fitted in?

The control unit 95910-0X700 belongs to Hyundai. It is fitted in these vehicles: Hyundai i10 PA (2008-2010) and PA Facelift (2011-2013).

The vehicles are listed in this overview:

• Hyundai i10 PA (2008-2010)
• Hyundai i10 PA Facelift (2011-2013)

Compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. Have the fault memory read out beforehand. Only this log shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-0X100, 95910-0X150, 95910-0X200, 95910-B9250.

How does the repair of the 95910-0X700 work?

Processing at Airbag24 usually takes 3–4 working days. First have the fault memory read out and enclose the log. Then disconnect the battery, only then remove the control unit and create a repair order online.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a function test. Afterwards, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-0X700 get to Airbag24?

You send the unit in as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 sends it back via UPS.

The printed repair order goes in the parcel. Pack the unit shock-resistant.