Airbag control unit with part number 95910-0Z300

What does the airbag control unit 95910-0Z300 do?

The airbag control unit 95910-0Z300 is the central control unit for the restraint system in Kia. It measures the signals from the impact sensors, decides in an accident within milliseconds on the triggering of airbags and seatbelt pretensioners, and monitors the system without interruption.

The unit shows faults via the airbag warning light in the instrument cluster. The control unit thus has a dual role: triggering and monitoring.

After an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-0Z300 fail?

For the 95910-0Z300, crash data stored after an accident is the most common cause, even if no airbag has been triggered. An ordinary diagnostic tool does not delete it; Airbag24 removes it during the repair. Several electronic causes are also possible.

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connectors
• voltage spikes, for example from a weak battery or jump-starting

Which of these applies is only shown by the examination of the unit.

How can you tell that the 95910-0Z300 is defective?

On the 95910-0Z300, a defect shows itself through the airbag warning light in the instrument cluster, which stays on permanently or intermittently. In addition, a fault message appears, or the diagnostic tool does not find the control unit. A fault memory that cannot be cleared is also a sign.

As long as these signs persist, airbags and seatbelt pretensioners may possibly not trigger in an emergency. A prompt check is therefore advisable.

Which vehicles is the 95910-0Z300 fitted in?

Models of Kia are recorded for this part number. The control unit 95910-0Z300 is fitted in these vehicles: Kia Sportage KM/JE (2004-2010).

The following vehicles are recorded for this part number:

• Kia Sportage KM/JE (2004-2010)

The label comparison of the part number with this page confirms only the unit itself. Only the fault memory read out beforehand shows whether the control unit is defective or whether a plug or cable is the cause, so have it read out first.

For the same vehicles, we also repair control units with the part numbers 95910-3U600, 95910-3W800, 95910-D9000, 959100Z200, 959101F110, 959103U100.

How does the repair of the 95910-0Z300 work?

First have the fault memory read out and attach the log. Then disconnect the battery, remove the control unit and create the repair order online. Then send in the well-packed unit. Checking, repairing and testing at Airbag24 usually take 3–4 working days.

The battery must be disconnected before removal. This sequence is mandatory for safety.

At Airbag24 the unit is first checked on the test bench. Defective components are replaced, stored crash data is deleted, and then the functional test follows. Your own unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-0Z300 get to Airbag24?

The 95910-0Z300 can be sent to Airbag24 as a parcel, or a UPS collection can be booked for an extra charge. After the repair, Airbag24 sends it back by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.