Airbag control unit with part number 95910-1C250

What does the airbag control unit 95910-1C250 do?

The airbag control unit 95910-1C250 coordinates the airbags and seatbelt pretensioners of Hyundai as an SRS control unit. It processes the readings from the crash sensors and decides within milliseconds in an accident what is triggered.

As long as the car is being driven, the unit continuously checks whether all restraint system components are working. If it finds a fault, it switches on the airbag warning light in the instrument cluster and stores the entry in the fault memory.

If an accident occurs, the control unit saves crash data and then locks itself. The driver does not notice the evaluation process.

Why does the control unit 95910-1C250 fail?

The unit most often fails because of stored crash data that remains in the unit after an accident, even without an airbag deployment. A normal diagnostic tool cannot erase it. Other causes include aged components, corrosion, moisture and voltage spikes.

Crash data remains in the control unit until it is deleted. Airbag24 removes it during the repair, so the unit works without this legacy data afterwards.

The other causes mainly affect the electronics and their surroundings. These include the following:

• Aged electronic components
• Cold solder joints on the circuit board
• Moisture and corrosion at plug connections
• Voltage spikes, for example from a weak battery or a jump start

Which of these causes applies to your unit only becomes clear during the workshop inspection. A suspicion alone is not enough for that.

How can you tell that the 95910-1C250 is defective?

Defects on the 95910-1C250 show up as faults on the airbag warning light, as fault messages in the instrument cluster, as a missing connection to the diagnostic tool and as a fault memory that cannot be cleared.

• Airbag warning light stays on permanently or intermittently
• Fault message in the instrument cluster
• The diagnostic tool cannot find the control unit
• The fault memory cannot be cleared

In an emergency, airbags and seatbelt pretensioners may fail to trigger while the fault persists. Please have the system checked promptly, because the warning light makes the defect visible.

Which vehicles is the 95910-1C250 fitted in?

The control unit 95910-1C250 is fitted in these vehicles: Hyundai Getz TB (2002-2005) and TB Facelift (2005-2009).

The following vehicles, which we have assigned at Airbag24, belong to this unit:

• Hyundai Getz TB (2002-2005)
• Hyundai Getz TB Facelift (2005-2009)

Compare the part number on the label of the removed unit with this page. This only confirms that it is the correct unit. Have the fault memory read out beforehand, because this log shows whether the control unit itself is the cause or whether a plug or cable is causing the fault.

For the same vehicles, we also repair control units with the part numbers 1C959-10270, 95910-1C100, 95910-1C200, 95910-1C270, 959101C650.

How does the repair of the 95910-1C250 work?

The repair of the 95910-1C250 begins with reading out the fault memory; please enclose the log. Then disconnect the battery and only remove the control unit afterwards. Processing at Airbag24 usually takes 3–4 working days, and you send the unit well packed.

First you create a repair order online. Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Afterwards, your own unit is returned to you.

This time only applies to checking, repairing and testing at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1C250 get to Airbag24?

You send the control unit 95910-1C250 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.