Airbag control unit with part number 95910-1G110

What does the airbag control unit 95910-1G110 do?

As the central control unit of the restraint system (SRS) of Kia, the airbag control unit 95910-1G110 evaluates the impact signals. In an accident it decides whether airbags and seatbelt pretensioners are triggered, and it checks the system continuously for faults.

While driving, it runs in the background and checks, among other things, sensors and wiring. Faults appear via the airbag warning light.

An accident leads to crash data being stored; after that the unit remains locked.

Why does the control unit 95910-1G110 fail?

Crash data is the most common cause: it stays stored after an accident, even if no airbag has deployed, and an ordinary diagnostic tool does not erase it. Other possible causes are aged components, cold solder joints, moisture with corrosion on contacts, and voltage spikes from the vehicle electrical system, for example from a jump start or a weak battery.

This data arises at the impact and sits in the memory of the control unit. Only during the repair does Airbag24 remove it in a targeted way.

Other causes develop more over time. Electronics age, solder joints lose stability, and moisture promotes corrosion. Brief voltage spikes when starting can also cause damage.

How can you tell that the 95910-1G110 is defective?

A fault shows up on the airbag warning light that stays on permanently or intermittently, on error messages in the instrument cluster, on a missing connection of the diagnostic tool, and on a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners could fail to trigger as a result.

The warning light indicates whether the system has detected a fault. It should go out after the ignition is switched on.

Connection problems with the diagnostic tool do not always concern the control unit. Plugs and the power supply can also be the cause.

Which vehicles is the 95910-1G110 fitted in?

The control unit 95910-1G110 from Kia is fitted in these vehicles: Kia Rio JB (2005-2011). The stored assignment to this part number is decisive.

The vehicles are listed below:

• Kia Rio JB (2005-2011)

Comparing the label with this page only confirms that the unit fits. Whether it is defective or the cause lies in plugs or cables is shown only by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-1G150, 959101W200, 959101W600, 959101W610.

How does the repair of the 95910-1G110 work?

Have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Afterwards create the repair order online and send in the well-packed unit. Airbag24 usually needs 3–4 working days for checking, repairing and testing.

At Airbag24 the unit is checked, defective components are replaced, the crash data is erased and a function test is carried out. Afterwards Airbag24 sends your own unit back to you.

The 3–4 working days refer only to this work at Airbag24. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1G110 get to Airbag24?

You send the control unit 95910-1G110 in a parcel to Airbag24 or book a UPS collection. After the repair, Airbag24 returns it to you by UPS.

Enclose the printed repair order in the parcel and pack the control unit so that it is shock-resistant.