Airbag control unit with part number 95910-1H250

What does the airbag control unit 95910-1H250 do?

The airbag control unit 95910-1H250 controls the restraint system (SRS) of Kia. It evaluates the sensors, determines in an accident which airbags and seatbelt pretensioners trigger, and checks the system for faults continuously.

If a fault is detected, the unit passes it on to the airbag warning light in the instrument cluster. Evaluation in an emergency has to be very fast, which is why the control unit is designed for it.

After an accident, it stores crash data and is then locked.

Why does the control unit 95910-1H250 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered. A standard diagnostic tool cannot erase this data. Other causes are ageing components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

Crash data is stored regardless of whether an airbag has triggered. That is precisely why the link to the accident only becomes apparent during troubleshooting.

The other causes lie in the electronics themselves. Components age, solder joints can go cold, and moisture or corrosion affect plug connections. Voltage spikes, for example from a weak battery or from jump-starting, can also cause faults.

Which cause applies in an individual case is shown by the inspection of the unit.

How can you tell that the 95910-1H250 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, an error message is shown in the instrument cluster, the diagnostic tool does not get a connection to the control unit, and the fault memory cannot be cleared.

The warning light therefore shows the defect as soon as the system detects it. It makes no difference whether the light is on continuously or only intermittently.

In an emergency, airbags and seatbelt pretensioners may possibly not trigger. If you notice any of these signs, have the system checked.

Which vehicles is the 95910-1H250 fitted in?

The 95910-1H250 is fitted in these vehicles: Kia cee'd ED (2006-2013).

This overview shows the vehicles for which the unit is intended:

• Kia cee'd ED (2006-2013)

Check the part number on the label of the removed unit against this page, so you can be sure you have the right unit. Have the fault memory read out before removal. Only this log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1H000, 959101H200.

How does the repair of the 95910-1H250 work?

Have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Create the repair order online and send in the carefully packed unit.

Airbag24 checks the unit on the test bench, replaces defective components, deletes the stored crash data and carries out a function test. Processing usually takes 3–4 working days, then your unit goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1H250 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

Place the printed repair order in the parcel and pack the unit shock-proof.