Airbag control unit with part number 95910-1J100

What is the function of the airbag control unit 95910-1J100?

The airbag control unit 95910-1J100 is the central control module for the occupant restraint system (SRS) in the Hyundai i20 of the BC series (from 2020 onwards). It continuously analyzes data from crash sensors and is responsible for precisely and rapidly deploying airbags and seatbelt pretensioners in the event of a collision.

As the “brain” of the passive safety system, this module communicates seamlessly with all relevant components. These include acceleration sensors located at the front and sides of the vehicle, seat occupancy mats that detect passengers, as well as pyrotechnic initiators in the airbags and seatbelt pretensioners.

Its primary task is to evaluate sensor data in real time. If measured values exceed a predefined threshold indicating an impact, the control unit sends ignition signals to the corresponding restraint systems—such as the driver’s airbag, knee airbag, or seatbelt pretensioners. Proper functionality is therefore critical for occupant safety.

Why does the airbag control unit 95910-1J100 fail?

A failure of the 95910-1J100 control unit is usually caused by stored crash data following an accident, which triggers an internal lockout of the system. Other common causes include internal hardware defects such as short circuits, damage due to undervoltage from a faulty battery, or physical factors like moisture and corrosion on the circuit board.

The most frequent cause of failure is crash data retained in the internal memory. Even after a minor accident where restraint systems were deployed, the control unit can become locked and requires professional reset procedures. Simply clearing the fault memory via a diagnostic tool is not sufficient in these cases.

Electronic faults on the circuit board represent another major cause. Short circuits, undervoltage from a weak battery or a defective alternator, and cable breaks can damage sensitive components. Environmental factors such as moisture from spilled beverages—especially during installation beneath the seats—or extreme heat can also lead to corrosion and eventual failure.

Defects of this type are also observed in related or compatible part numbers, including 95910-1J000, 95910-1J400, 95910-C8100, and 5WK43925-95640. The repair process for these variants is generally identical.

How do you recognize a defect in the 95910-1J100?

A defective 95910-1J100 control unit primarily manifests as a permanently illuminated airbag warning light on the instrument cluster. Often, the unit cannot be accessed using a diagnostic tool, or error codes such as B1000, B1102, or B1620 appear and cannot be cleared.

The most obvious symptom is the persistently lit airbag warning light. It does not turn off after starting the vehicle, signaling a serious system malfunction.

In the workshop, the defect often becomes apparent through a lack of communication: the control unit is no longer reachable via the OBD interface, preventing external diagnostics. Alternatively, specific error codes remain stored in memory, indicating an internal fault that cannot be erased. Typical errors include B1000, B1102 (undervoltage), B1620 (internal fault), B1410, or B1346.

Caution: A lit airbag warning light means the entire restraint system is inoperative. In the event of a crash, neither airbags nor seatbelt pretensioners will deploy. Although the vehicle remains drivable, it no longer provides occupant protection. Immediate inspection at a specialized workshop is essential.

Using airbag simulators or resistors to bypass the issue is life‑threatening, results in loss of operating approval, and disqualifies the vehicle from passing the main technical inspection (HU).

In which vehicles is the 95910-1J100 installed?

The airbag control unit with part number 95910-1J100 is specifically designed for the third‑generation Hyundai i20 (BC series). This includes all models manufactured between 2020 and 2024, including the facelifted versions launched from 2023 onward.

At Airbag24, we repair the 95910-1J100 control unit for the following specific models:

Hyundai i20 (BC series, model years 2020–2024)

Hyundai i20 Facelift (BC series, from model year 2023 onward)

How is the 95910-1J100 repaired?

Professional repair at Airbag24 begins after removal and shipment of the control unit. Our technicians analyze the fault memory and hardware, erase stored crash data, and address electronic defects at the component level. Following a final functional test, you receive a fully operational unit backed by a 12‑month warranty.

First, a specialized workshop should perform a proactive diagnosis to confirm that the fault lies with the control unit itself and not with the wiring or a sensor. After proper removal, the unit is securely packaged for transport. A printout of the diagnostic report should be included with the shipment.

Upon receipt at Airbag24, our technicians conduct a thorough analysis. The repair involves electronically erasing crash data from the internal memory and addressing hardware issues such as short circuits or defective components on the circuit board.

Subsequently, the unit undergoes an extensive functional test to ensure proper operation. Following successful repair, the control unit is returned to you, fully operational and compliant with vehicle inspection requirements. In some cases, after reinstallation, the vehicle’s fault memory must be cleared.

What shipping options are available?

You can either deliver your control unit to Airbag24 free of charge in person or send it by post. Alternatively, we offer convenient UPS pickup from your preferred location. Return shipping is free via UPS Standard or, optionally, Express service, both also available with cash-on-delivery.

For outbound shipping, you have two choices: either ship the package to us yourself or arrange for UPS pickup on any weekday. Personal drop-off at our workshop is also possible.

For returning the repaired control unit, we provide several options. UPS Standard shipping is free of charge. If faster delivery is required, UPS Express is available, along with both options including cash-on-delivery. Alternatively, you may choose to pick up the unit in person from our facility.