Airbag control unit with part number 95910-1M160

What does the airbag control unit 95910-1M160 do?

The airbag control unit 95910-1M160 is the central evaluation unit of the restraint system (SRS) for Kia. It processes the signals from the crash sensors, decides in an accident whether airbags and seatbelt pretensioners are triggered, and monitors the entire system continuously.

After an accident it stores crash data and locks itself. If there is a fault, the airbag warning light in the instrument cluster indicates it.

The unit is generally inconspicuous and active in the background. This role is nonetheless decisive for the safety of the occupants.

Why does the control unit 95910-1M160 fail?

Stored crash data after an accident is the most common cause, even if no airbag has triggered; with a normal diagnostic tool it cannot be removed. Other causes include aged electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump-starting.

The crash data remains in the unit until it is deliberately removed. This also applies when the vehicle drives perfectly afterwards.

The other causes act over a longer period: electronics age, solder joints become brittle and moisture penetrates plugs. Voltage spikes from the on-board supply add further stress.

How can you tell that the 95910-1M160 is defective?

The warning light lights up in the instrument cluster, either permanently or intermittently. In addition there are error messages, no connection to the diagnostic tool and a fault memory that cannot be cleared.

As long as the fault exists, airbags and seatbelt pretensioners may not trigger in an emergency. The warning light should therefore not be ignored.

The display comes from the system itself and is not a chance finding. A read-out of the fault memory then explains what it is.

Which vehicles is the 95910-1M160 fitted in?

The 95910-1M160 is in use in these vehicles: Kia Forte TD (2008-2013); Kia Cerato TD (2008-2012).

The list below shows which models are affected.

• Kia Forte TD (2008-2013)
• Kia Cerato TD (2008-2012)

Two steps belong to the assignment. With the label comparison you establish whether the removed unit matches this page. With the fault memory read out in advance you clarify whether the control unit itself or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1M100, 95910-1M450, 95910-1M460, 95910-1M500.

How does the repair of the 95910-1M160 work?

The process starts with reading out the fault memory; the log goes with the unit. Only after the battery has been disconnected is the control unit removed. You then create the repair order online and pack the unit carefully.

At Airbag24 a test bench examines the unit. Defective components are repaired and stored crash data is deleted. A function test follows, after which you receive the unit back.

For examination, repair and testing, Airbag24 generally plans 3–4 working days.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1M160 get to Airbag24?

You send the unit in as a parcel, or you book a UPS collection for an extra charge. UPS returns it after the repair is complete.

Place the printed repair order in the parcel and pack the unit shockproof.