Airbag control unit with part number 95910-1M650

What does the airbag control unit 95910-1M650 do?

The airbag control unit 95910-1M650 is the central control unit of the restraint system (SRS) of Kia. It evaluates the crash sensors and, in the event of a crash, decides within milliseconds which airbags and seatbelt pretensioners are triggered.

It also monitors the entire system during operation. It shows detected faults via the airbag warning light in the instrument cluster.

After a crash, the unit stores crash data and locks itself.

Why does the control unit 95910-1M650 fail?

The most common cause is crash data stored after a crash, even if no airbag was deployed. Other possible causes include ageing electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

A normal diagnostic tool cannot erase crash data. Airbag24 erases it during the repair.

Electronic components age, and solder joints can go cold. Moisture and corrosion at plug connectors impair transmission, and a weak battery or jump-starting can cause voltage spikes.

How can you tell that the 95910-1M650 is defective?

A fault shows up as an airbag warning light in the instrument cluster that stays on constantly or intermittently. An error message can appear as well, and the diagnostic tool cannot establish a connection to the control unit. In that case, airbags and seatbelt pretensioners may not deploy in an emergency.

This warning is clear, because the warning light indicates the fault. A vehicle that still drives is therefore not automatically fine.

Please have the warning checked promptly.

Which vehicles is the 95910-1M650 fitted in?

The control unit 95910-1M650 is fitted in these vehicles: Kia Forte TD (2008-2013); Kia Cerato TD (2008-2012).

The following list shows the vehicles recorded for this part number.

• Kia Forte TD (2008-2013)
• Kia Cerato TD (2008-2012)

Two separate steps confirm the match. Comparing the part number on the label of the removed unit with this page confirms that you have the right unit. The fault memory shows whether the control unit itself or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1M100, 95910-1M450, 95910-1M460, 95910-1M500.

How does the repair of the 95910-1M650 work?

First have the fault memory read out and attach the log. Then disconnect the battery and remove the control unit. Then create a repair order online and send in the well-packed unit.

Airbag24 checks the unit on the test bench, repairs defective components, erases the stored crash data and carries out a function test. Your own unit is then returned to you.

Processing at Airbag24 usually takes 3–4 working days, meaning only the checking, repairing and testing.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1M650 get to Airbag24?

You send the control unit as a parcel or book a UPS collection for an extra charge. After the repair you receive the unit back by UPS.

Put the printed repair order into the parcel and pack the control unit shock-proof.