Airbag control unit with part number 95910-1P000

What is the function of the airbag control unit 95910-1P000?

The airbag control unit with part number 95910-1P000 is the central control module for the entire restraint system in the Kia Venga YN (2009–2019). It continuously monitors signals from crash sensors, controls the deployment of airbags and seatbelt pretensioners in the event of a collision, and stores relevant system and fault data.

As the “brain” of the safety system, this module evaluates data from acceleration and pressure sensors in the vehicle. Based on this information, it makes split-second decisions about whether and which restraint devices need to be activated.

In addition to activation, the unit also manages internal system diagnostics. It constantly checks all connected components—such as airbags, seatbelt pretensioners, and sensors—for proper functionality and reports any malfunctions to the driver via the airbag warning light on the instrument panel.

Why does the control unit 95910-1P000 fail?

The most common cause of failure for control unit 95910-1P000 is stored crash data following an accident, which can lock the system. Similarly, internal electronic faults—indicated by error codes such as B1620 (internal error) or B1102 (low voltage supply)—can lead to deactivation of the airbag system.

After a collision, the control unit permanently stores so‑called crash data. This permanent storage is a safety feature that mandates inspection and repair of the system, preventing further driving with a potentially compromised system.

Another frequent issue is an internal hardware fault, often signaled by error code B1620. This indicates problems with internal components such as microcontrollers or capacitors on the circuit board. Such faults may also arise from electrical interference or component aging.

The part number may also appear as 959101P000 without a hyphen. Although similar part numbers exist for other Kia models, precise compatibility verification before repair or replacement is essential.

How do you recognize a defect in 95910-1P000?

A defective airbag control unit 95910-1P000 primarily manifests as a permanently illuminated or intermittently flashing airbag warning light on the dashboard. During diagnosis, error codes such as B1102, B1620, or B2500 cannot be cleared, indicating either a serious internal fault or stored crash data.

The clearest sign is the active airbag warning light. If it remains lit continuously, the system has detected a critical fault and has preemptively disabled both airbags and seatbelt pretensioners. In the event of a crash, these systems would not deploy.

When reading the fault memory, specific error codes appear. Code B1620 (“Internal Error”) directly points to a defect within the control unit itself, while B1102 suggests a problem with the power supply, which may also originate inside the device.

A key symptom is a workshop’s inability to clear these error codes or stored crash data using standard diagnostic tools. In such cases, the control unit is locked and requires specialized electronic repair.

In which vehicles is the control unit 95910-1P000 installed?

The airbag control unit with part number 95910-1P000 is specifically designed for the Kia Venga YN series, produced from 2009 to 2019. It is used across various engine configurations of this model, including gasoline and diesel variants.

At Airbag24, we repair the 95910-1P000 control unit for the following model and its variants:

Kia Venga (YN), model years 2009–2019.

This includes popular engine options such as the 1.4 CVVT (gasoline), the 1.4 CRDi with 90 hp (diesel), and the 1.6 CRDi with 85 kW (diesel). Compatibility is closely tied to the vehicle’s specific configuration.

How is 95910-1P000 professionally repaired?

Professional repair of the 95910-1P000 is performed at the electronic level, avoiding costly replacement of the unit. After sending the unit to Airbag24, the fault memory is read, crash data is erased, and internal hardware defects are fixed. All repairs undergo a final test and come with 2 years' statutory liability for defects.

First, a workshop should read the fault memory to confirm the defect. Then, the control unit is removed and securely packaged for shipment to Airbag24.

Our technicians conduct a thorough diagnosis of the unit. The core of the repair involves reprogramming the memory to remove crash data and resolve errors like B1620. If necessary, defective electronic components on the circuit board—such as microcontrollers or capacitors—are expertly replaced.

After successful repair, the control unit is tested on a test bench to ensure flawless functionality across all systems. The repaired unit is then returned to you and can be reinstalled without further coding.