Airbag control unit with part number 95910-1Q000

What is the function of Airbag Control Unit 95910-1Q000?

The Airbag Control Unit 95910-1Q000, also known as the SRS module, is the central control unit for the occupant protection system in the Kia Forte YD (model years 2013–2018). It processes data from crash sensors, deploys airbags and seatbelt pretensioners in the event of a collision, and permanently stores relevant crash data.

As the “brain” of the safety system, this module monitors the operational readiness of all components. It communicates with the engine control unit and other vehicle systems. In case of irregularities or after deployment, it activates the airbag warning light on the instrument cluster to alert the driver to a fault or system blockage.

This control unit is specifically mapped for the Kia Forte YD. It is typically housed in a robust metal enclosure beneath the center console, dashboard, or driver’s seat and can be identified by its distinctive yellow or black connector.

Why does Airbag Control Unit 95910-1Q000 fail?

The most common cause of failure for control unit 95910-1Q000 is the storage of crash data following an accident. These so‑called hard fault codes permanently lock the module and cannot be cleared using standard diagnostic tools. Other causes include electronic malfunctions, communication issues, or moisture ingress.

After a crash in which airbags or seatbelt pretensioners have deployed, the control unit writes a permanent record into its internal memory. This lockout entry (Deployment Event) serves as documentation and prevents unauthorized further use. The module becomes electronically blocked, even though the hardware itself is often undamaged.

In addition to crash data, internal electronic faults or communication disruptions can also lead to failure. Faulty wiring, corroded contacts due to moisture, or CAN bus system malfunctions may generate soft fault codes that likewise trigger the warning light but often stem from causes other than deployment.

Related part numbers such as 95910A7200 or 95910B0000 may exhibit similar symptoms in other Forte models, while part number 95910-1Q000 is specific to the YD platform.

How do you recognize a defect in control unit 95910-1Q000?

The clearest symptom is a continuously illuminated airbag warning light (SRS light) on the instrument panel. Additionally, the control unit may become unresponsive when connected to an OBD diagnostic tool, or display error codes that cannot be cleared—such as deployed airbags or a locked control unit.

The airbag indicator light remains on after the vehicle is started, signaling a serious fault in the restraint system that requires immediate inspection. Until the issue is resolved, the vehicle must be considered unsafe for road use.

When diagnosing with an airbag scanner, specific fault codes can be retrieved. Typical messages indicate deployed components, such as the driver’s or knee airbags, or a missing connection to the side airbags. In many cases, the control unit is also listed as “locked” in the engine control unit’s fault memory.

Another clear sign is the workshop’s inability to erase stored fault codes. Particularly hard crash codes following an accident can only be removed through specialized electronic repair.

In which vehicles is control unit 95910-1Q000 installed?

The Airbag Control Unit with part number 95910-1Q000 is designed exclusively for Kia models. It is primarily used in the Kia Forte of the YD generation, manufactured during a specific production period. A repair restores full functionality.

At Airbag24, we service control unit 95910-1Q000 for the following model and associated series:

Kia: Forte YD (model years 2013–2018)

How is control unit 95910-1Q000 professionally repaired?

Professional repair is a purely electronic process. After removal and shipment to Airbag24, the control unit is analyzed; stored crash data and hard fault codes are erased using specialized software, and the device is reset to factory settings. Following repair, it is fully functional again (plug-and-play).

First, disconnect the vehicle battery for at least five minutes before removing the control unit. Once detached, the module is securely packaged and sent to Airbag24, where an initial inspection identifies the exact fault.

The core repair involves erasing the black-box data and all non‑erasable fault codes directly from the control unit’s memory chip. This is accomplished using specialized programming equipment that provides direct access to the processor and EEPROM memory. If necessary, defective electronic components are soldered or replaced.

A major advantage of repair is that no reprogramming of the vehicle identification number (VIN) or seat‑occupancy detection is required. The reset control unit is immediately ready for installation and fully compatible with the original vehicle. We offer a 12‑month warranty on all repairs.

Is it worth repairing control unit 95910‑1Q000?

Yes, repair is the most economical and sustainable solution. Compared to a new original part, which can cost several hundred euros, repair often saves 30–50% or more. Additionally, there’s no need for costly reprogramming at an authorized dealer, as the repaired unit is plug‑and‑play.

According to the manufacturer, a new original control unit for Kia models can easily exceed 400 euros, plus installation and programming fees at the workshop. The total cost of replacement can quickly rise to 600–750 euros. Used modules are cheaper but carry the risk of already storing crash data or not being perfectly matched to your vehicle.

Electronic repair by a specialist is not only more cost‑effective but also safe and reliable. It fully restores the original functionality of the component, making it preferable to purchasing a used part. Given the safety‑critical nature of the SRS system, we strongly advise against improper DIY repair attempts.

How does the control unit get to Airbag24?

You can send us your removed airbag control unit in several ways. Choose between free self‑shipping, convenient UPS pickup from your preferred location, or personal drop‑off. For return shipping, we also offer flexible options such as free standard UPS delivery or fast express service.

For outbound shipping, you have two choices: either ship the package yourself—at no cost—to our address, or arrange for UPS to pick it up directly from your home or workshop.

After successful repair, we promptly return the control unit to you. You can select from the following free and paid shipping options:

Free standard UPS delivery (1–3 business days)

UPS express delivery (1–2 business days)

Standard UPS delivery with cash on delivery (1–3 business days)

Express UPS delivery with cash on delivery (1–2 business days)

Of course, you can also pick up the repaired unit in person at our facility.