Airbag control unit with part number 95910-1R150

What does the airbag control unit 95910-1R150 do?

The airbag control unit 95910-1R150 controls the restraint system in Hyundai. It reads the impact sensors, determines within milliseconds in a crash which airbags and seatbelt pretensioners to trigger, and checks the entire system without pause.

It shows faults via the airbag warning light in the instrument cluster, so the condition of the system remains readable at all times.

After a crash, the control unit records crash data and locks itself.

Why does the control unit 95910-1R150 fail?

On the 95910-1R150, stored crash data is the most common cause, even if no airbag has triggered. A normal diagnostic tool cannot remove it; Airbag24 erases it during the repair. Also possible are aged components, cold solder joints, moisture and corrosion at plugs, and voltage spikes.

Nothing on the vehicle needs to look abnormal when crash data is in the control unit.

The remaining causes concern the electronics itself. Components age, solder joints can stay cold, and moisture causes corrosion in plugs. Voltage spikes, for example from a weak battery or jump-starting, put additional strain on the unit.

How can you tell that the 95910-1R150 is defective?

On the 95910-1R150, a defect shows through an airbag warning light in the instrument cluster that stays on permanently or intermittently. Likewise, a fault message in the instrument cluster, no connection to the diagnostic tool, or a fault memory that cannot be cleared may appear.

While the fault persists, airbags and seatbelt pretensioners may not trigger in an emergency. Have the indication checked promptly.

Which vehicles is the 95910-1R150 fitted in?

The control unit 95910-1R150 is fitted in Hyundai vehicles: Hyundai Accent RB (2010-2017). The assignment is stored for this part number.

The following vehicles are on record:

• Hyundai Accent RB (2010-2017)

Comparing the part number on the label of the removed unit with this page ensures that it is the correct unit. Read out the fault memory beforehand, as only its contents show whether the control unit itself is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1R250, 95910-25200, 95910-25500.

How does the repair of the 95910-1R150 work?

First have the fault memory read out and enclose the log, then disconnect the battery and remove the control unit. Next create the repair order online and send in the well-packed unit. Airbag24 checks it, repairs it and tests it.

The battery is disconnected before removal. Only then is removal intended.

Checking, repairing and testing at Airbag24 usually take 3–4 working days. Crash data is deleted and defective components are replaced, after which your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1R150 get to Airbag24?

You can send the 95910-1R150 in as a parcel or have it collected by UPS for an extra charge. After the repair, Airbag24 returns the unit by UPS.

Place the printed repair order in the parcel and pack the unit shock-proof.