Airbag control unit with part number 95910-1W300

What does the airbag control unit 95910-1W300 do?

The airbag control unit 95910-1W300 controls the restraint system (SRS) in vehicles of the Kia brand. It reads the signals from the crash sensors and decides in an impact which airbags and seatbelt pretensioners are triggered.

The decision is made within milliseconds. At the same time, the unit monitors the system permanently and reports faults via the airbag warning light. After an accident, it stores crash data and is locked afterwards.

Why does the control unit 95910-1W300 fail?

The most frequent cause is the crash data stored after an accident, even if no airbag has deployed. For the control unit 95910-1W300, ageing electronic components, cold solder joints, moisture and corrosion at plug connections and voltage spikes can also be the cause:

• ageing electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

Crash data cannot be erased with a normal diagnostic tool. The fault therefore remains if the unit is queried only with a standard tool. The listed causes can also interact with one another.

How can you tell that the 95910-1W300 is defective?

A defect in the control unit 95910-1W300 shows up as the airbag warning light, which stays on permanently or intermittently. Additionally, an error message appears, the diagnostic tool finds no connection, and the fault memory cannot be cleared.

• Airbag warning light, permanently or intermittently
• Error message in the instrument cluster
• No connection between diagnostic tool and control unit
• Fault memory remains after an attempt to clear it

With such a finding, airbags and seatbelt pretensioners may not be able to trigger in an emergency. The warning light therefore gives an early hint, and you should react to it promptly.

Which vehicles is the 95910-1W300 fitted in?

The control unit 95910-1W300 is fitted in these vehicles: Kia Rio UB (2011-2017).

These vehicles are known to us for this part number:

• Kia Rio UB (2011-2017)

First check the part number on the label of the removed unit and compare it with this page. This only shows that it is the right unit. The cause is established only by the fault memory you have read out, because it shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 0K32B677F0, 95910-0W500, 95910-1W100, 95910-1W500, 95910-1W510, 959101G900.

How does the repair of the 95910-1W300 work?

Airbag24 needs 3–4 working days to check, repair and test the 95910-1W300. Beforehand, you have the fault memory read out, enclose the log and disconnect the battery. Only then do you remove the control unit and create a repair order online.

First comes sending the well-packed unit. At Airbag24, it is examined on the test bench, defective components are repaired, the crash data is erased and a function test concludes the work. Afterwards, the unit goes back to the sender. The time specified refers only to the work at Airbag24. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-1W300 get to Airbag24?

You send the control unit 95910-1W300 as a parcel or, for an extra charge, book a UPS collection. After the repair, Airbag24 sends the unit back to you by UPS.

Enclose the printed repair order in the parcel and pack the control unit shock-proof.