Airbag control unit with part number 95910-1Y110

What is the function of the airbag control unit 95910-1Y110?

The airbag control unit with part number 95910-1Y110 is the central control module for the passive safety system (SRS) in vehicles such as the Kia Picanto TA and Kia K3 BD. It receives and processes data from crash sensors to precisely and rapidly deploy the airbags and seatbelt pretensioners in the event of a collision.

As an OEM original part, this control unit is responsible for monitoring all components of the Supplemental Restraint System (SRS). It continuously communicates with the vehicle’s acceleration and pressure sensors. When the electronics detect a collision exceeding predefined thresholds, it sends ignition signals to the appropriate restraint devices.

The module is also known under alternative part numbers 959101Y110, 1Y959-10110, or 5WK44333. A failure of this unit results in complete deactivation of the airbag system, which not only poses a significant safety risk but also makes passing the main inspection (HU) impossible.

Why does the control unit 95910-1Y110 fail?

A failure of the control unit 95910-1Y110 is primarily caused by two factors: internally stored crash data following an accident that permanently locks the device, or an internal defect in electronic components on the circuit board. Both fault conditions prevent normal operation of the airbag system and require professional repair.

The most common cause of malfunction is the storage of crash data. After deploying airbags or seatbelt pretensioners, the manufacturer locks the control unit for safety reasons. This lock cannot be removed using standard workshop diagnostic tools and requires reprogramming at the chip level.

In addition, purely electronic defects may occur. These include cold solder joints, faulty processors or memory chips, as well as damage caused by moisture or overvoltage. Such hardware failures often lead to total communication breakdown or persistent internal error codes.

Similar control units for the Kia Picanto, such as models with part numbers 95910-1V110, 95910-07100, 95910-07200, 95910-1Y100, 95910-1Y610, and 95910-1Y500, frequently exhibit identical fault patterns and follow comparable repair procedures.

How do you recognize a defect in the 95910-1Y110?

A defect in the control unit 95910-1Y110 typically manifests unmistakably through a constantly illuminated or flashing airbag or SRS warning light on the instrument panel. Additional signs include loss of communication with the diagnostic tool or persistent error codes that cannot be cleared.

The most obvious symptom is the active airbag warning light. It fails to turn off after starting the vehicle, indicating a serious, safety‑relevant system fault.

In many cases, the control unit becomes inaccessible to diagnostic equipment. When a workshop attempts to read the fault memory, communication fails, preventing accurate fault analysis via the OBD port.

Occasionally, specific error codes are logged, pointing to internal defects—such as issues related to the seat occupancy mat or a “missing” Vehicle Identification Number (VIN) stored in the device. These errors cannot be permanently erased.

For safety reasons, it is crucial to avoid improper repair attempts, such as using airbag simulators, resistors, or jumpers. Such manipulations are life‑threatening, result in the loss of operating approval, and merely create a false sense of security.

In which vehicles is the control unit 95910-1Y110 installed?

The airbag control unit 95910-1Y110 is a specific OEM component primarily used in vehicles manufactured by Kia. It is especially found in second‑generation Kia Picanto models (TA) and the newer Kia K3 (BD).

At Airbag24, we repair part number 95910-1Y110 for the following commonly available European models and series:

Kia Picanto (TA generation, model years 2011–2017)

Kia K3 (BD generation, from model year 2018 onward)

How does repair work at Airbag24?

At Airbag24, repairs follow a standardized process. After removal and shipment of the control unit, a precise diagnosis is performed. Stored crash data is then cleared, defective components replaced, and the unit returned to you after a final functional test.

The process begins with the proper removal of the defective control unit from the vehicle. Please send the securely packaged unit to Airbag24.

Our technicians perform a comprehensive incoming inspection to identify the exact cause of the fault—whether it’s a crash-data lockout or an electronic defect.

The repair process includes professionally erasing the crash data at the processor level and replacing all defective electronic components with high-quality new parts. Following the repair, the control unit undergoes rigorous quality testing.

Repair is a cost-effective alternative to expensive replacement, which often costs between 500 and 1,000 euros. In addition, every repaired unit comes with 2 years’ statutory liability for defects.