Airbag control unit with part number 95910-1Y610

What is the function of the airbag control unit 95910-1Y610?

The airbag control unit 95910-1Y610 is the central control module of the occupant protection system in Kia Picanto models of the TA and JA generations. It receives and processes signals from crash sensors and, in the event of a collision, precisely triggers the airbags and seatbelt pretensioners to ensure the safety of vehicle occupants.

As the brain of the passive safety system, this component continuously monitors vehicle dynamics. Upon impact, it analyzes collision data within milliseconds and determines which restraint systems need to be activated. After repair, the control unit functions like new again, restoring the vehicle’s full protective capabilities.

Why does the control unit 95910-1Y610 fail?

The most common reason for repair is the storage of crash data after an accident that cannot be erased. Other defects include internal electronic faults leading to complete failure, communication issues with the vehicle, or physical damage caused by water or mechanical impact.

A typical symptom is the immobilization of the control unit following a collision. Even if no airbags deployed, the unit may internally store a crash record that prevents further operation and activates the airbag warning light. This entry often requires specialized chip-level repair to remove.

General electronic malfunctions—such as faulty components on the circuit board or damaged VIN numbers stored in memory—are also frequent causes of failure. Technically, this control unit is related to alternative part numbers 95910-1Y110, 95910-07200, 95910-07220, 95910-07720, and 5WK66147, which are used in the same vehicle generations and may exhibit similar fault patterns.

How do you recognize a defect in the 95910-1Y610?

The primary symptom of a defective airbag control unit 95910-1Y610 is a permanently illuminated airbag warning light on the instrument cluster. Often, the control unit can no longer be accessed with a diagnostic tool, or internal, non-erasable error codes appear.

An active airbag warning light indicates that the entire vehicle restraint system is disabled. In the event of an accident, the airbags and seatbelt pretensioners would not deploy, posing a significant safety risk and inevitably resulting in failure during the mandatory technical inspection (HU).

For safety and legal reasons, immediate repair is mandatory. Using simulators, resistors, or other workarounds is life‑threatening and will lead to the revocation of the vehicle’s operating permit. Work on the airbag system must only be performed by trained specialists.

In which vehicles is the control unit 95910-1Y610 installed?

The airbag control unit with part number 95910-1Y610 is specifically designed for Kia models. At Airbag24, we primarily service this control unit for second- and third‑generation Kia Picanto series, which enjoy widespread popularity across the European market.

At Airbag24, repairs for the 95910-1Y610 control unit are offered for the following models:

Kia Picanto TA (2011–2017)

Kia Picanto JA (2017–present)

How does the repair of the 95910-1Y610 proceed at Airbag24?

After removal and shipment to Airbag24, the control unit undergoes a detailed diagnosis. Our technicians identify the specific damage, repair faulty electronic components, and reset stored crash data. Final tests ensure full functionality. We provide a 12‑month warranty on every repair.

The process ideally begins with a fault diagnosis on the vehicle to confirm that the issue lies within the control unit. Following professional removal, the device is securely packaged for transport and sent to us. At Airbag24, repairs are carried out at the component level, fully restoring functionality. After reinstallation in the vehicle, the fault memory must be cleared to reactivate the system.

What shipping options does Airbag24 offer?

For your control unit repair, Airbag24 provides flexible shipping options. You can send the package yourself free of charge or arrange convenient UPS pickup. For return shipments, both free standard UPS delivery and faster express options—including cash-on-delivery—are available.

Shipping to Airbag24:

You can either ship the removed control unit directly to us or bring it in person. Alternatively, you can schedule a UPS pickup at your preferred location and date.

Return shipping from Airbag24:

After successful repair, we offer several return options: free UPS standard shipping, UPS express shipping for faster delivery, and both options also available with cash-on-delivery. Personal pickup at our workshop is also possible.