Airbag control unit with part number 95910-25900

What is the function of the airbag control unit 95910-25900?

The airbag control unit with OEM part number 95910-25900 is the central control module for the Supplemental Restraint System (SRS) in the Hyundai Accent LC. It processes signals from crash sensors and is responsible for deploying airbags and seatbelt pretensioners in the event of a collision, thereby protecting occupants.

As the “brain” of the passive safety system, this module continuously monitors all connected components, including front and side airbags, seatbelt pretensioners, and their respective sensors. Its task is to analyze data received from acceleration sensors in real time and, when predefined thresholds are exceeded, activate the necessary restraint systems.

The control unit is typically installed in the vehicle’s center console to provide optimal protection against external influences and minor collisions. Proper functionality is critical for the overall safety of the vehicle.

What defects occur in 95910-25900?

The most common cause of failure for control unit 95910-25900 is stored crash data after an accident that cannot be cleared using workshop diagnostic tools. Other typical issues include loss of communication with diagnostic equipment and general electronic malfunctions caused by aging components such as capacitors or moisture damage.

After an airbag deployment, the unit stores crash data in non-volatile memory. This lockout feature is a safety measure designed to prevent further use. Consequently, the fault memory can no longer be reset via OBD diagnostics, making repair or replacement unavoidable.

A complete loss of communication is another well-known symptom. The control unit stops responding to requests from diagnostic tools. The root cause is usually an internal hardware defect on the circuit board, such as problems with processors or voltage regulators.

Aging and environmental factors can also lead to failures. Electrolytic capacitors, in particular, may lose capacitance or leak over time, resulting in malfunctions or total module failure.

How do you recognize a defect in 95910-25900?

A defect in the airbag control unit 95910-25900 typically manifests as a permanently illuminated airbag warning light on the instrument cluster. Another clear indication is the inability to establish a diagnostic connection to the SRS module via the OBD port, rendering it impossible to read fault codes.

The most noticeable sign is the red airbag warning light (SRS light). It remains lit after starting the vehicle, signaling a malfunction in the restraint system. In this state, airbags and seatbelt pretensioners are deactivated, posing a significant safety risk.

When workshops attempt to read the fault memory, they often receive the message “No communication with the control unit.” This confirms that the module is so severely damaged internally that it is no longer responsive or has self‑locked following an accident.

In which vehicles is 95910-25900 installed?

The airbag control unit with part number 95910-25900 is exclusively fitted in certain Hyundai models. It is the original part number for the Hyundai Accent LC series, covering both pre‑facelift and facelift versions.

At Airbag24, we repair the 95910-25900 control unit for the following Hyundai‑produced models:

Hyundai Accent LC (model years 2000–2003)

Hyundai Accent LC Facelift (model years 2003–2005)

Is repairing 95910-25900 worthwhile?

Repairing the 95910-25900 control unit is an economically and technically sensible alternative to purchasing a new one. The main advantage lies in substantial cost savings, as a new unit often exceeds €300, while repair is significantly more affordable. Additionally, the original module is preserved, restoring its full functionality.

Professional refurbishment is not only cost‑effective but also sustainable. It avoids disposing of otherwise functional electronics and ensures you retain the original control unit tailored specifically to your vehicle. After repair, the module once again meets factory standards and guarantees the full safety of the airbag system.

How is 95910-25900 professionally repaired?

Professional repair of the 95910-25900 follows a standardized process. Following an initial inspection of the unopened unit, stored crash data is erased, defective electronic components on the circuit board are replaced with genuine parts, and finally, a comprehensive functional and calibration test is performed to ensure full operational reliability.

After being sent to Airbag24, the control unit undergoes several steps. First, it is carefully disassembled and subjected to precise electronic diagnostics to accurately pinpoint the cause of the fault. Subsequently, all defective components, such as capacitors or resistors, are professionally replaced.

A key part of the repair process is resetting the crash data and clearing all internal fault memory. In the final step, the repaired control unit is thoroughly tested and calibrated to ensure reliable performance in an emergency. We provide a 12-month warranty on every repair.

What shipping options are available?

For repairing your control unit, Airbag24 offers flexible and secure shipping options. You can either send the unit yourself at no cost or arrange a convenient UPS pickup. For return shipping, you can choose between free standard delivery and faster express options, both also available with cash-on-delivery.

For outbound shipping, you have two choices: either ship the package yourself or book a convenient UPS pickup from a location of your choice. Return shipping is available via various options:

Free UPS standard delivery (1–3 business days), UPS express delivery (1–2 business days), UPS standard delivery with cash-on-delivery (1–3 business days), UPS express delivery with cash-on-delivery (1–2 business days), or personal self-collection at our premises.