Airbag control unit with part number 95910-2B080

What does the airbag control unit 95910-2B080 do?

The airbag control unit 95910-2B080 is the component in the restraint system (SRS) of Hyundai that processes the signals from the crash sensors. In an accident, it decides within milliseconds which airbags and seatbelt pretensioners are triggered, and it monitors the system continuously.

If the system detects a fault, it appears via the airbag warning light. After an accident, the unit also stores crash data and locks itself. Monitoring continues in the background.

Why does the control unit 95910-2B080 fail?

Stored crash data is the most common cause, because the unit stores it after an accident even if no airbag was triggered; a normal diagnostic tool cannot erase it. Other causes include aged electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes.

The crash data remains stored until it is removed during the repair. Airbag24 takes over the erasing.

Components age, solder joints can go cold, and moisture or corrosion affect plug connections. Voltage spikes, for example from a weak battery or a jump-start, can also affect the unit.

How can you tell that the 95910-2B080 is defective?

If the airbag warning light in the instrument cluster lights up constantly or only intermittently, this points to a defect. In addition, there are error messages in the instrument cluster, a missing connection to the diagnostic tool, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then fail to trigger. The indication therefore deserves attention, because it points to a safety-relevant system.

Which vehicles is the 95910-2B080 fitted in?

This control unit is fitted in the following vehicles: Hyundai Santa Fe CM (2006-2009) and CM Facelift (2009-2012).

The list of vehicles follows:

• Hyundai Santa Fe CM (2006-2009)
• Hyundai Santa Fe CM Facelift (2009-2012)

The comparison of the label with this page confirms that you have the right unit. Whether the control unit is defective, or whether a plug or cable is the cause, is shown by the fault memory. Therefore have it read out before removal.

For the same vehicles, we also repair control units with the part numbers 95910-2B000, 95910-2B070, 95910-2B100, 95910-2B170, 95910-2B200, 95910-2B270.

How does the repair of the 95910-2B080 work?

First have the fault memory read out and enclose the log, then disconnect the battery and only then remove the control unit. Processing at Airbag24 usually takes 3–4 working days.

Afterwards, create a repair order online and send the unit in well packed. Airbag24 tests the unit on the test bench, repairs defective components, erases stored crash data and carries out a function test; after that, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2B080 get to Airbag24?

Either you pack the unit yourself into a parcel, or you book a UPS collection for an extra charge. The repaired unit also comes back to you from Airbag24 by UPS.

Shock-proof packed, together with the printed repair order, the unit is ready for transit.