Airbag control unit with part number 95910-2E000

What does the airbag control unit 95910-2E000 do?

At Hyundai, the airbag control unit 95910-2E000 controls the SRS restraint system. It captures the signals from the crash sensors, selects the appropriate airbags and seatbelt pretensioners within milliseconds in an emergency, and checks the system continuously. Faults appear via the airbag warning light.

The unit holds the entire restraint system together by matching all components with one another. After an accident, it creates crash data and then locks itself.

Why does the control unit 95910-2E000 fail?

The most common cause is crash data from an earlier accident, even if no airbag was triggered. Ordinary diagnostic tools cannot reach this data to erase it. Other triggers are aged electronic components, cold solder joints, moisture and corrosion at plug connectors, and voltage spikes.

Aged electronics usually show no symptoms at first, until a component reaches its limit.

Cold solder joints can loosen over time, and their location is hardly visible from outside.

Corrosion at plugs develops slowly through moisture, whereas a weakened battery can briefly produce voltage spikes.

How can you tell that the 95910-2E000 is defective?

A persistently or intermittently lit airbag warning light is the first warning sign. Added to this are an error message in the instrument cluster, a lack of contact with the diagnostic tool, and a fault memory that cannot be cleared.

Do not ignore these signs. In an emergency, airbags and seatbelt pretensioners may not deploy.

Which vehicles is the 95910-2E000 fitted in?

At Hyundai this control unit is relevant only for some of the models. The control unit 95910-2E000 is fitted in these vehicles: Hyundai Tucson JM (2004-2010).

The vehicles at a glance:

• Hyundai Tucson JM (2004-2010)

Compare the part number on the label of the removed unit with this page, and you know that it is the correct unit. Have the fault memory read out beforehand, since only it shows whether the control unit is faulty or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 44B49060NAS, 95910-2E400, 95910-2E700, 959102S500, 959102S850.

How does the repair of the 95910-2E000 work?

First have the fault memory read out and enclose the log; then disconnect the battery and only then remove the unit. In the next step, create a repair order online and send the unit in well packed. At Airbag24, processing usually takes 3–4 working days.

The crash data is erased at Airbag24 after defective components have been repaired. A function test then concludes the process, and the unit is sent back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2E000 get to Airbag24?

You hand in the unit as a parcel, or you arrange UPS collection for an extra charge. The return after the repair is again by UPS.

Place the printed repair order in the parcel and pack the unit shockproof.