Airbag control unit with part number 95910-2E210

What does the airbag control unit 95910-2E210 do?

The function of the airbag control unit 95910-2E210 is to activate airbags and seatbelt pretensioners within the restraint system (SRS) of Hyundai. To do this, it reads the crash sensors and decides on triggering within milliseconds in an accident.

It also monitors all components of the system continuously. If it detects a fault, it shows this via the airbag warning light in the instrument cluster.

After an accident, the unit records crash data and is then locked.

Why does the control unit 95910-2E210 fail?

Stored crash data is the most common cause: it remains in memory after an accident, even without a triggered airbag, and an ordinary diagnostic tool does not remove it. Other causes include ageing electronics, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data are the record of the event and remain in the unit until they are erased during the repair.

The other causes arise regardless of an accident, as components age or solder joints go cold.

Moisture, corrosion and voltage spikes, for example from a weak battery or a jump start, can also be the cause.

How can you tell that the 95910-2E210 is defective?

A defect shows itself through the airbag warning light, which stays on permanently or intermittently, a fault message in the instrument cluster, no connection to the diagnostic tool and a fault memory that cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

• Airbag warning light permanently or intermittently on
• Fault message in the instrument cluster
• Diagnostic tool without connection to the control unit
• Fault memory that cannot be cleared

The indication carries weight, so a check is advisable.

Which vehicles is the 95910-2E210 fitted in?

The 95910-2E210 is fitted in these vehicles: Hyundai Tucson JM (2004-2010).

The following list shows the assignments:

• Hyundai Tucson JM (2004-2010)

Comparing the part number from the label of the removed unit with this page merely confirms that the right unit is at hand. Whether the control unit itself is defective or a plug or cable is behind the fault is shown only by the fault memory read out beforehand.

For the same vehicles, we also repair control units with the part numbers 44B49060NAS, 95910-2E400, 95910-2E700, 959102S500, 959102S850.

How does the repair of the 95910-2E210 work?

You first read out the fault memory, enclose the log and then disconnect the battery. Afterwards you remove the control unit, create a repair order online and send in the well-packed unit.

At Airbag24, the unit is checked on the test bench, defective components are replaced, stored crash data is erased and a function test is carried out. Processing at Airbag24 usually takes 3–4 working days, after which your own unit returns.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2E210 get to Airbag24?

You send the unit in as a parcel, or you arrange a UPS collection for an extra charge. After the repair, it comes back to you by UPS.

Use shock-resistant packaging and enclose the printed repair order.