Airbag control unit with part number 95910-2E510

What does the airbag control unit 95910-2E510 do?

The airbag control unit 95910-2E510 is the central control unit of the restraint system (SRS) in Hyundai. It evaluates the signals from the crash sensors, triggers the appropriate airbags and seatbelt pretensioners within milliseconds in an accident, and stores crash data after an accident. It then locks itself.

The unit monitors the system continuously and shows faults via the airbag warning light.

The lock is lifted only by the repair.

Why does the control unit 95910-2E510 fail?

For the 95910-2E510, the most common cause is crash data stored after an accident, even if no airbag was deployed. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A standard diagnostic tool cannot erase this crash data, so it stays stored until the repair removes it.

Aged electronic components, cold solder joints, and moisture and corrosion at the plug connections can also lead to failure.

Voltage spikes occur, for example, with a weak battery or from a jump start.

How can you tell that the 95910-2E510 is defective?

The airbag warning light on the 95910-2E510 lights up permanently or intermittently in the instrument cluster. In addition there is an error message in the instrument cluster, a diagnostic tool without connection to the control unit, or a fault memory that cannot be cleared.

If the warning light stays on, airbags and seatbelt pretensioners may not deploy in an emergency. Have the system checked promptly.

Which vehicles is the 95910-2E510 fitted in?

The airbag control unit 95910-2E510 is fitted in these vehicles: Hyundai Tucson JM (2004-2010).

The vehicles at a glance:

• Hyundai Tucson JM (2004-2010)

(a) Compare the part number on the label of the removed unit with this page; this only confirms that you have the right unit in front of you. (b) Have the fault memory read out beforehand, because only the result shows whether the control unit is defective or whether a connector or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 44B49060NAS, 95910-2E400, 95910-2E700, 959102S500, 959102S850.

How does the repair of the 95910-2E510 work?

For the 95910-2E510, read out the fault memory, enclose the log and disconnect the battery. Only then remove the control unit, create a repair order online and send in the unit. Processing at Airbag24 usually takes 3–4 working days.

Pack the unit well and send it in as soon as the repair order has been created.

Airbag24 checks the unit on the test bench, repairs defective components, erases stored crash data and carries out a functional test. The unit then goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2E510 get to Airbag24?

You send the control unit 95910-2E510 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the unit shockproof.