Airbag control unit with part number 95910-2E600

What does the airbag control unit 95910-2E600 do?

The 95910-2E600 is the control unit of the SRS restraint system in Hyundai vehicles. It processes the signals from the crash sensors and, in a crash, decides within milliseconds on airbags and seatbelt pretensioners.

It monitors the system continuously. If the unit detects a fault, it indicates it via the airbag warning light.

After a crash, it stores crash data and locks itself.

Why does the control unit 95910-2E600 fail?

The most common cause in the 95910-2E600 is stored crash data after an accident, even if no airbag has deployed. A standard diagnostic tool cannot erase it. Other causes are ageing electronic components, cold solder joints, moisture at plug connections and voltage spikes.

The other causes in detail:

• Ageing electronic components, which lose reliability over time.
• Cold solder joints, which can weaken the contact.
• Moisture and corrosion at plug connections.
• Voltage spikes, for example from a weak battery or a jump start.

Airbag24 erases the crash data during the repair, even though it cannot be removed by ordinary means.

How can you tell that the 95910-2E600 is defective?

The airbag warning light in the instrument cluster lights up on the 95910-2E600 permanently or intermittently. A diagnostic tool with no connection to the control unit and a fault memory that cannot be cleared are among the signs. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The signs at a glance:

• Airbag warning light on permanently or intermittently.
• Error message in the instrument cluster.
• No connection to the diagnostic tool.
• Fault memory cannot be cleared.

The warning light is the notice the system gives itself.

Which vehicles is the 95910-2E600 fitted in?

For Hyundai, the 95910-2E600 is fitted in this vehicle: Hyundai Tucson JM (2004-2010). The information is based on the stored data.

The stored vehicles are shown below:

• Hyundai Tucson JM (2004-2010)

Comparing the part number on the label of the removed unit with this page only ensures that the unit is the right one. Only the fault memory, read out beforehand, shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 44B49060NAS, 95910-2E400, 95910-2E700, 959102S500, 959102S850.

How does the repair of the 95910-2E600 work?

Have the fault memory read out and enclose the printout. Then disconnect the battery and only after that remove the 95910-2E600. Next, create the repair order online and pack the unit well.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and runs a function test.

At Airbag24 itself, testing, repair and the function test usually take 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2E600 get to Airbag24?

The 95910-2E600 is sent in as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it by UPS.

The printed repair order goes into the parcel, and the unit is packed shockproof.