Airbag control unit with part number 95910-2F900

What does the airbag control unit 95910-2F900 do?

Within the restraint system (SRS) of Kia, the airbag control unit 95910-2F900 controls the triggering of the airbags and seatbelt pretensioners. The basis is the measured values of the crash sensors, which the unit evaluates within milliseconds in a crash.

At the same time, it checks the system for faults on an ongoing basis and displays them via the airbag warning light. After an accident, it stores crash data and then locks itself.

Why does the control unit 95910-2F900 fail?

Stored crash data is regarded as the most common cause, even if no airbag was deployed in the accident. Added to this are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage peaks.

Crash data cannot be erased with a standard diagnostic tool. The other causes are ageing and connection problems: electronic components deteriorate, solder joints are no longer reliable, and moisture and corrosion attack the plugs.

Voltage peaks, for example from a weak battery or jump-starting, additionally affect the electronics. Which cause applies is only determined by the check.

How can you tell that the 95910-2F900 is defective?

A defect shows up at the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Fault messages in the instrument cluster, no connection to the diagnostic tool or a fault memory that cannot be cleared also point to this. In an emergency, airbags and seatbelt pretensioners may then fail to trigger.

The warning light reports the defect as soon as the system detects it, which makes it the most important warning sign on the dashboard. Do not ignore it.

Which vehicles is the 95910-2F900 fitted in?

The 95910-2F900 is fitted in these vehicles: Kia Spectra SD (2000-2009).

The vehicles in the following list belong to this part number.

• Kia Spectra SD (2000-2009)

Check the part number on the label of the removed unit against this page to confirm that you have the right unit. The cause is not established by this: only the fault memory, which you have read out beforehand, shows whether the control unit is defective or a plug or cable is affected.

For the same vehicles, we also repair control units with the part numbers 959102F400, 959102F450, 959102F470, 97RA-0103516.

How does the repair of the 95910-2F900 work?

First the fault memory is read out, and the log goes with the unit. Then disconnect the battery, remove the control unit 95910-2F900 and create a repair order online. Airbag24 checks the unit, replaces defective components, erases the crash data and carries out a functional test.

Pack the unit well before you send it. Airbag24 sends it back to you on completion.

Processing at Airbag24 usually takes 3–4 working days, and that covers checking, repairing and testing only.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2F900 get to Airbag24?

You send the control unit 95910-2F900 as a parcel, or you book a UPS collection for an extra charge. The return to you is made by UPS.

The printed repair order belongs in the parcel, and the unit is packed shockproof.