Airbag control unit with part number 95910-2K110

What does the airbag control unit 95910-2K110 do?

The airbag control unit 95910-2K110 is responsible for the restraint system (SRS) of Kia. It evaluates the crash sensors, decides in an accident within milliseconds on the airbags and seatbelt pretensioners, and monitors the system continuously.

It reports faults in the system via the airbag warning light in the instrument cluster.

After an accident the control unit creates crash data and then locks itself. This data stays in the unit until the repair.

Why does the control unit 95910-2K110 fail?

The most common cause on the 95910-2K110 is crash data stored after an accident, even if no airbag has deployed. Other possible causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A normal diagnostic tool cannot erase the crash data. Airbag24 erases it during the repair.

Voltage spikes, for example from a weak battery or a jump start, are a further possible load on the electronics.

How can you tell that the 95910-2K110 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently when the 95910-2K110 is defective. An error message in the instrument cluster is added, and the fault memory cannot be cleared.

The diagnostic tool also gets no connection to the control unit if there is a defect.

In an emergency, airbags and seatbelt pretensioners may not deploy, so the warning light is an important sign.

Which vehicles is the 95910-2K110 fitted in?

The 95910-2K110 is fitted in these vehicles: Kia Soul AM (2008-2014).

The vehicles recorded for this control unit are in the list.

• Kia Soul AM (2008-2014)

Compare the part number on the label of the removed unit with this page. That only establishes that you have the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2K350, 959102K000, 959102K050, 95910B2010, 95910B2300, 95910B2600.

How does the repair of the 95910-2K110 work?

You have the fault memory read out and enclose the log. Then disconnect the battery and only after that remove the 95910-2K110. Next, create a repair order online and send the unit in, well packed.

Airbag24 checks the control unit on the test bench, replaces defective components if necessary, erases the stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2K110 get to Airbag24?

You send the 95910-2K110 in a parcel or book a UPS collection for an extra charge. The return after the repair is also made by UPS.

Put the printed repair order into the parcel, and pack the unit shock-proof.