Airbag control unit with part number 95910-2K150

What does the airbag control unit 95910-2K150 do?

As the SRS control unit of Kia, 95910-2K150 controls the restraint system. It detects crashes via the crash sensors, decides within milliseconds which airbags and seatbelt pretensioners are triggered, and checks the system continuously. It reports faults via the airbag warning light.

The triggering of the airbags and seatbelt pretensioners depends on this unit.

In a crash, the unit writes crash data and then locks itself.

Why does the control unit 95910-2K150 fail?

The most common cause lies in crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool does not make it disappear.

Besides the crash data, these causes may apply:

• aged electronic components
• cold solder joints
• moisture and corrosion on plug connections
• voltage spikes, for example from a weak battery

Airbag24 removes the crash data as part of the repair.

How can you tell that the 95910-2K150 is defective?

An airbag warning light in the instrument cluster that lights up permanently or intermittently is the first indication of a defect. In addition, the instrument cluster shows error messages, the diagnostic tool cannot find the control unit, or the fault memory cannot be cleared.

If the light stays on, have the system checked promptly. This is the reason for the quick check, because in an emergency airbags and seatbelt pretensioners may not be triggered.

Which vehicles is the 95910-2K150 fitted in?

The control unit 95910-2K150 from Kia is fitted in these vehicles: Kia Soul AM (2008-2014).

The list shows the vehicles for which this part number is stored:

• Kia Soul AM (2008-2014)

Comparing the part number on the label of the removed unit with this page confirms that you have removed the right unit. However, have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether plugs and cables are the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2K350, 959102K000, 959102K050, 95910B2010, 95910B2300, 95910B2600.

How does the repair of the 95910-2K150 work?

Start by having the fault memory read out and put the log in the parcel. Then disconnect the battery, only then remove the control unit 95910-2K150, and create a repair order online. Next, send the well-packed unit in.

Airbag24 checks the unit on the test bench, repairs defective components, deletes the crash data and performs a function test. Your own unit then goes back to you.

Processing at Airbag24 usually takes 3–4 working days. This only applies to checking, repairing and testing in our workshop.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2K150 get to Airbag24?

You send the control unit 95910-2K150 as a parcel, or you book a UPS collection for an extra charge. Airbag24 sends the repaired unit back to you by UPS.

Include the printed repair order in the parcel and pack the unit shock-proof.