Airbag control unit with part number 95910-2K250

What does the airbag control unit 95910-2K250 do?

At Kia, the airbag control unit 95910-2K250 carries out the evaluation of the restraint system (SRS). In an accident it issues, within milliseconds, the command as to which airbags and seatbelt pretensioners are triggered; to do so, it reads in the crash sensors.

It checks all components of the system continuously. If it reports a fault, the instrument cluster warning light lights up. After an accident, it records the crash data and locks itself.

Why does the control unit 95910-2K250 fail?

The most common cause with the 95910-2K250 is a crash data record stored after an accident, even without an airbag having been triggered. Other causes are aged components, cold solder joints, moisture and corrosion, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 removes it during repair.

• aging of the electronics
• cold solder joints
• moisture and rust on the plugs
• current surges from the battery or a jump-start

How can you tell that the 95910-2K250 is defective?

The warning light in the instrument cluster lights up permanently or intermittently on the 95910-2K250, and a fault message appears in the instrument cluster. The diagnostic tool finds no connection to the control unit, and the fault memory remains.

In that case, airbags and seatbelt pretensioners may not deploy in an emergency. The warning light is the direct indication that the control unit itself gives.

Which vehicles is the 95910-2K250 fitted in?

The 95910-2K250 is fitted in these vehicles: Kia Soul AM (2008-2014).

The models to which this part number belongs are shown in the following list:

• Kia Soul AM (2008-2014)

A comparison of the part number on the label of the removed unit only shows whether it is the right unit. Whether the unit is defective or a plug or cable is the cause is shown by the fault memory. Have it read out beforehand.

For the same vehicles, we also repair control units with the part numbers 95910-2K350, 959102K000, 959102K050, 95910B2010, 95910B2300, 95910B2600.

How does the repair of the 95910-2K250 work?

Processing at Airbag24 usually takes 3–4 working days. For the repair of the 95910-2K250, first have the fault memory read out and enclose the log. Then disconnect the battery, remove the unit and send it in well packed after creating the repair order online.

At Airbag24, the unit is examined on the test bench. Defective components are replaced, the crash data is erased and a function test concludes the work. Afterwards, your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2K250 get to Airbag24?

You send the 95910-2K250 as a parcel or book a UPS collection for an extra charge. Airbag24 sends it back to you via UPS after the repair.

Put the printed repair order into the parcel and pack the unit shockproof.