Airbag control unit with part number 95910-2M000

What does the airbag control unit 95910-2M000 do?

The airbag control unit 95910-2M000 is the control centre of the restraint system (SRS) in Hyundai. It processes the measurements from the crash sensors, determines within milliseconds in the event of an accident which airbags and seatbelt pretensioners trigger, and checks the system continuously.

The unit reports faults in the system via the airbag warning light in the instrument cluster. In this way, the driver knows that something is wrong without having to open the unit.

After an accident, the unit stores crash data and locks itself. Only the repair lifts this lock.

Why does the control unit 95910-2M000 fail?

The most common cause of a fault in the 95910-2M000 is crash data stored after an accident, even if no airbag has deployed. A normal diagnostic tool cannot erase it. Other causes are:

• aged electronic components
• cold solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

The fact that no airbag has deployed does not rule out stored crash data. For this reason, this point is the first to check in any fault search.

The other causes range from ageing of the components to external influences on the plug connections.

At Airbag24, crash data is erased as part of the repair.

How can you tell that the 95910-2M000 is defective?

On the 95910-2M000, the airbag warning light in the instrument cluster lights up permanently or intermittently. In addition, a fault message appears in the instrument cluster, the diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. Airbags and seatbelt pretensioners may then possibly not trigger in an emergency.

The airbag warning light is the clearest sign the vehicle gives. If it does not go out after switching on the ignition or comes on while driving, have the system checked promptly. This applies even if the car otherwise behaves normally.

Which cause lies behind it is only revealed by reading out the fault memory. The warning light alone does not say whether the control unit or a cable is affected.

Which vehicles is the 95910-2M000 fitted in?

The 95910-2M000 is fitted in these vehicles: Hyundai Genesis Coupe BK.

You will find the vehicles recorded for this part number here:

• Hyundai Genesis Coupe BK

Compare the part number on the label of the unit with this page. This only confirms that you are removing the right unit. Whether the control unit itself is defective is only clarified by the fault memory, which you should have read out before removal.

For the same vehicles, we also repair control units with the part numbers 0 285 001 935, 0 285 010 180, 0 285 010 181, 0 285 010 859, 0 285 011 631, 95910-2M100.

How does the repair of the 95910-2M000 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, and only then remove the control unit 95910-2M000. Next, create a repair order online and send the unit in well packed.

Airbag24 then checks the unit on the test bench and repairs defective components. Stored crash data is erased, and a function test completes the work. Processing usually takes 3–4 working days, after which your own unit returns to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2M000 get to Airbag24?

You can send the control unit 95910-2M000 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back by UPS.

Enclose the printed repair order with the parcel. Pack the unit shock-proof, because vibration during transport should not add further stress to it.