Airbag control unit with part number 95910-2M260

What does the airbag control unit 95910-2M260 do?

The airbag control unit 95910-2M260 directs the restraint system (SRS) of Hyundai. Using the sensor data, it decides within milliseconds in a crash which airbags and seatbelt pretensioners fire, and it monitors the entire system continuously.

The control unit shows detected faults via the airbag warning light in the instrument cluster. For you, this light is the first indication that something in the system is wrong.

After a crash it stores crash data and locks itself; the repair ends this lock.

Why does the control unit 95910-2M260 fail?

Crash data stored after an accident is the most common cause with 95910-2M260, even without an airbag firing. Aged electronic components, cold solder joints, moisture and corrosion on connectors, and voltage spikes, for example from a weak battery or jump-starting, are also causes.

Diagnostic tools in the usual scope do not erase crash data. Airbag24 takes care of this during the repair.

The remaining causes produce similar symptoms; only testing can tell them apart.

How can you tell that the 95910-2M260 is defective?

An airbag warning light in the instrument cluster that lights up permanently or intermittently indicates a defect on the 95910-2M260. A fault message accompanies it, the diagnostic tool does not find the control unit, and the fault memory cannot be cleared. In such cases, airbags and seatbelt pretensioners may not trigger in an emergency.

The light comes from the system itself and must therefore be taken seriously.

Only reading the fault memory shows which fault is stored.

Which vehicles is the 95910-2M260 fitted in?

The airbag control unit 95910-2M260 is fitted in these vehicles: Hyundai Genesis Coupe BK.

The list of vehicles for this number is shown here:

• Hyundai Genesis Coupe BK

If the part number on the label of the removed unit matches this page, that is evidence that it is the correct unit. Whether the control unit or a connector or cable causes the fault is shown only by the fault memory. Have it read before removal.

For the same vehicles, we also repair control units with the part numbers 0 285 001 935, 0 285 010 180, 0 285 010 181, 0 285 010 859, 0 285 011 631, 95910-2M100.

How does the repair of the 95910-2M260 work?

First have the fault memory of the 95910-2M260 read and enclose the log with the unit, then disconnect the battery and remove the control unit. You then create the repair order online, and the well-packed unit goes to Airbag24. Processing at Airbag24 usually takes 3–4 working days.

First Airbag24 examines the unit, then defective components are replaced and crash data is erased. A function test concludes the work; after that your unit is sent back.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2M260 get to Airbag24?

The control unit 95910-2M260 arrives at Airbag24 as a parcel, or you book a UPS collection for an extra charge. The return is made by UPS after the repair.

Put the printed repair order into the parcel; the unit needs shock-proof packaging.