Airbag control unit with part number 95910-2P080

What does the airbag control unit 95910-2P080 do?

The airbag control unit 95910-2P080 is the control unit of the restraint system for Kia. It processes the crash sensors, triggers airbags and seatbelt pretensioners in an accident and monitors the system continuously.

It reports faults by switching on the airbag warning light. After an accident it also stores crash data, after which it locks itself.

Why does the control unit 95910-2P080 fail?

The most common cause is crash data stored after an accident, even without an airbag having been triggered. Further causes for the 95910-2P080 are listed below:

• ageing of electronic components
• dry solder joints
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or jump-starting

A standard diagnostic tool cannot reach this data to erase it. During the repair, Airbag24 removes it.

How can you tell that the 95910-2P080 is defective?

A fault shows up first on the airbag warning light in the instrument cluster, which lights up permanently or intermittently. Other signs include error messages, a lost connection to the diagnostic tool and a fault memory that cannot be cleared.

In an emergency this means airbags and seatbelt pretensioners may not trigger. The warning therefore needs to be checked promptly.

Which vehicles is the 95910-2P080 fitted in?

The control unit 95910-2P080 is fitted in these vehicles: Kia Sorento XM (2009-2014).

To compare, you can find the vehicles here:

• Kia Sorento XM (2009-2014)

First, check the part number on the label of the removed unit and compare it with this page. This only confirms that it is the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1U000, 95910-1U150, 95910-2P400, 95910-2P580, 959101U100.

How does the repair of the 95910-2P080 work?

First have the fault memory read out and enclose the log; then disconnect the battery and only then remove the control unit. Online, you create a repair order and send in the well-packed unit. Processing at Airbag24 usually takes 3–4 working days.

On the test bench, Airbag24 examines the control unit. Where necessary, components are replaced, crash data is removed and a function test is carried out before your own unit is returned.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2P080 get to Airbag24?

You send the control unit 95910-2P080 as a parcel or book a UPS collection for an extra charge. The return after the repair is also made via UPS.

A shock-proof box and the printed repair order belong in the parcel.