Airbag control unit with part number 95910-2P200

What does the airbag control unit 95910-2P200 do?

The control unit 95910-2P200 controls the restraint system (SRS) of Kia. It checks the crash sensors without interruption and determines in an accident within milliseconds which airbags and seatbelt pretensioners fire.

The airbag warning light in the instrument cluster is the unit's feedback to you as soon as a fault occurs in the system.

A crash causes the unit to store crash data and switch to the locked state.

Why does the control unit 95910-2P200 fail?

At 95910-2P200, the most common cause is: crash data stored after an accident, even if no airbag has been triggered. Further causes are aged components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

A normal diagnostic tool cannot remove this crash data, and that is precisely the difficulty.

Aged components cause problems over time, and solder joints eventually become cold. Moisture attacks plug connections until corrosion forms and the contact is disturbed.

A weak battery or a jump start can produce voltage spikes that damage the electronics.

How can you tell that the 95910-2P200 is defective?

The airbag warning light in the instrument cluster stays on permanently or lights up intermittently, and an error message appears in the instrument cluster. In addition, the diagnostic tool gets no connection to the control unit 95910-2P200, or the fault memory cannot be cleared.

A defect is therefore visible in the vehicle. The warning light should consequently not be ignored but checked.

In an emergency, airbags and seatbelt pretensioners may not be able to deploy during the fault.

Which vehicles is the 95910-2P200 fitted in?

The control unit 95910-2P200 is fitted in these vehicles: Kia Sorento XM (2009-2014).

For this unit, the following models are recorded with us:

• Kia Sorento XM (2009-2014)

Compare the part number on the label of the removed unit with this page, and you will know that it is the right unit. Have the fault memory read out beforehand, because only this result shows whether the control unit itself is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-1U000, 95910-1U150, 95910-2P400, 95910-2P580, 959101U100.

How does the repair of the 95910-2P200 work?

First have the fault memory read out and enclose the log, then disconnect the battery and then remove the control unit 95910-2P200. Then create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, replaces defective components, erases stored crash data and carries out a function test. For testing, repairing and checking at Airbag24, expect 3–4 working days as a rule.

Your own unit is then returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2P200 get to Airbag24?

You send the control unit 95910-2P200 to Airbag24 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Pack the unit shock-proof and enclose the printed repair order.