Airbag control unit with part number 95910-2S150

What does the airbag control unit 95910-2S150 do?

The airbag control unit 95910-2S150 is the central control unit of the restraint system (SRS) for Hyundai. It evaluates the crash sensors and decides in a collision within milliseconds on airbags and seatbelt pretensioners. After an accident it stores crash data and locks itself.

The unit reports faults via the airbag warning light in the instrument cluster.

Why does the control unit 95910-2S150 fail?

Stored crash data is the most common cause, even if no airbag has deployed. A normal diagnostic tool cannot erase it.

Further causes are:

• ageing electronic components
• cold solder joints on the circuit board
• moisture and corrosion at plug connections
• voltage spikes, for example from a weak battery or a jump start

How can you tell that the 95910-2S150 is defective?

The 95910-2S150 can show a defect through the airbag warning light, which lights up permanently or intermittently. Fault messages, a missing contact to the diagnostic tool and a fault memory that cannot be cleared are further signs. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Reading out the fault memory shows whether the control unit is affected. Do not postpone this check if the warning light keeps flickering on.

Which vehicles is the 95910-2S150 fitted in?

Whether it suits your car you can tell from the part number 95910-2S150 on the label. The control unit 95910-2S150 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

We have these vehicles on record for part number 95910-2S150:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Before removal, have the fault memory read out, so that it is clear whether the control unit is defective and not a plug or cable. Then compare the label of the removed unit with 95910-2S150.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2S150 work?

Have the fault memory read out, enclose the log and disconnect the battery. Then remove the control unit, create the repair order online and send the unit in well packed. Airbag24 checks the unit, repairs defective components, erases the crash data and carries out a function test.

Processing at Airbag24 usually takes 3–4 working days. The unit then goes back to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2S150 get to Airbag24?

A parcel, or a UPS collection for an extra charge, brings the control unit 95910-2S150 to Airbag24. The repaired unit comes back by UPS.

Pack the printed repair order into the parcel and protect the unit from knocks.