Airbag control unit with part number 95910-2S200

What does the airbag control unit 95910-2S200 do?

The airbag control unit 95910-2S200 controls the restraint elements at Hyundai. On the signals from the crash sensors, it decides in an emergency within milliseconds which airbags and seatbelt pretensioners fire, and it checks its own condition continuously.

If it reports a fault, the airbag warning light in the instrument cluster appears. After an accident it stores crash data and locks itself.

The self-monitoring runs in the background.

Why does the control unit 95910-2S200 fail?

The most common cause in the 95910-2S200 is that crash data was stored after an accident, even if no airbag was triggered. Failures can also result from aged electronic components, cold solder joints, moisture and corrosion at plug connections, or voltage spikes.

Crash data cannot be retrieved from the memory with a normal diagnostic tool. Airbag24 erases it during the repair.

The other causes relate to the electronics themselves. Components age, solder joints become prone to failure over time, and moisture or corrosion affects the plug connections. Voltage spikes, as they occur with a weak battery or when connecting a jump-start, additionally load the circuit.

How can you tell that the 95910-2S200 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently as soon as something is wrong with the 95910-2S200. Added to this are an error message in the instrument cluster, a missing connection to the diagnostic tool and a fault memory that cannot be cleared.

As long as the fault exists, airbags and seatbelt pretensioners may not be triggered in an emergency. A timely check helps to narrow down the cause.

Which vehicles is the 95910-2S200 fitted in?

Whether the 95910-2S200 fits your car is shown by the model assignment. The control unit 95910-2S200 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The models are listed here:

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Compare the part number on the label of the unit with this page. That only clarifies that it is the right unit. Have the fault memory read out beforehand, because it reveals whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2S200 work?

First have the fault memory read out and enclose the log with the unit. Then disconnect the battery, remove the control unit 95910-2S200 and create a repair order online. Finally send in the well-packed unit.

Airbag24 checks the unit on the test bench, replaces defective components, deletes stored crash data and carries out a function test. Afterwards the unit is returned to you.

At Airbag24 this work generally takes 3–4 working days. That period covers only checking, repairing and testing. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2S200 get to Airbag24?

The 95910-2S200 reaches Airbag24 as a parcel, or you book a UPS collection for an extra charge. After the repair it returns to you by UPS.

Pack the unit shock-proof, and do not forget the printed repair order.