Airbag control unit with part number 95910-2S700

What does the airbag control unit 95910-2S700 do?

The 95910-2S700 is the airbag control unit in the restraint system (SRS) of Hyundai. It processes the signals from the crash sensors and decides in an accident, within milliseconds, which airbags and seatbelt pretensioners are triggered.

During operation it monitors the connected components and reports faults via the airbag warning light in the instrument cluster.

If the vehicle is involved in an accident, the unit stores crash data and locks itself.

Why does the control unit 95910-2S700 fail?

With the 95910-2S700, crash data from an accident stored in the unit is the most common cause, even if no airbag has triggered. Aged electronic components, cold solder joints, moisture and corrosion on plug connectors, and voltage spikes are also involved.

A normal diagnostic tool cannot erase the crash data. Airbag24 takes on this task as part of the repair.

Ageing of the electronics, cold solder joints, and moisture and corrosion on the plugs also play a role.

Voltage spikes, for example from a weak battery or a jump start, put a strain on the electronics.

How can you tell that the 95910-2S700 is defective?

A defect on the 95910-2S700 shows up through the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition there may be a fault message in the instrument cluster, a diagnostic tool without connection, and a fault memory that cannot be cleared.

In such a case, airbags and seatbelt pretensioners may not trigger in an emergency.

This warning is therefore a prompt to have the system examined and should not be ignored.

Which vehicles is the 95910-2S700 fitted in?

The 95910-2S700 is fitted in these vehicles: Hyundai ix35 LM (2009-2013) and LM Facelift (2013-2015).

The list shows the vehicles that are recorded for this part number.

• Hyundai ix35 LM (2009-2013)
• Hyundai ix35 LM Facelift (2013-2015)

Compare the part number on the label of the removed unit with this page; then you know it is the right unit. You cannot conclude the condition of the control unit from this. Have the fault memory read out beforehand, because only the result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 95910-2Y100, 95910-2Y200.

How does the repair of the 95910-2S700 work?

First read out the fault memory and attach the log. Then disconnect the battery, remove the 95910-2S700, create a repair order online and send the unit in well packed.

Airbag24 checks the unit on the test bench, repairs defective components, erases the crash data and carries out a functional test. Processing at Airbag24 usually takes 3–4 working days.

The unit is then returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2S700 get to Airbag24?

You can send the 95910-2S700 in as a parcel or have it collected by UPS for an extra charge. After the repair, Airbag24 sends the unit back to you by UPS.

The printed repair order goes into the parcel, and you pack the unit shock-proof.