Airbag control unit with part number 95910-2T010

What does the airbag control unit 95910-2T010 do?

The airbag control unit 95910-2T010 is the central control unit for the SRS restraint system in Kia vehicles. It checks the signals from the crash sensors, decides in an accident on airbags and seatbelt pretensioners, and monitors the system continuously.

Faults are indicated via the airbag warning light. The unit works in the background until something stands out.

After an accident, it creates crash data and then locks itself.

Why does the control unit 95910-2T010 fail?

Crash data stored after an accident is the most frequent cause, even if no airbag has fired. An ordinary diagnostic tool cannot erase it. Further causes are ageing components, cold solder joints, moisture at plug connections and voltage spikes.

Stored crash data remains in the control unit, even though the vehicle appears unremarkable from the outside. Only the repair at Airbag24 removes it from the 95910-2T010.

The other causes occur gradually. Electronics age, solder joints become brittle, and moisture attacks the contacts. A weak battery or a jump start can also produce voltage spikes that stress the control unit.

How can you tell that the 95910-2T010 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, and fault messages appear in the display. In addition, the diagnostic tool cannot establish a connection to the control unit, and the fault memory remains.

These signs show that the restraint system is faulty. In an emergency, airbags and seatbelt pretensioners may not trigger. Take the warning seriously.

The warning light explains itself: you need neither to measure nor to dismantle anything to notice the finding.

Which vehicles is the 95910-2T010 fitted in?

The control unit 95910-2T010 is fitted in these vehicles: Kia Optima TF (2010-2015).

These vehicles are on record for this part number:

• Kia Optima TF (2010-2015)

Compare the part number on the label of your removed control unit with the information on this page. This shows whether you have the correct unit in front of you.

Have the fault memory read out beforehand. The log shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 692002T010, 95910-2G400, 95910-D5000, 95910-D5500.

How does the repair of the 95910-2T010 work?

Processing at Airbag24 usually takes 3–4 working days. During this time, the unit is checked, defective components are replaced, crash data is erased and a function test is carried out.

First, have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Finally, create a repair order online and send the unit well packed.

After the repair, your own unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2T010 get to Airbag24?

You send the control unit 95910-2T010 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Put the printed repair order in the parcel and pack the control unit shock-proof.