Airbag control unit with part number 95910-2T110

What does the airbag control unit 95910-2T110 do?

The airbag control unit 95910-2T110 controls the restraint system (SRS) for Kia. It analyses the signals from the impact sensors and decides in a crash, in fractions of a second, which airbags and seatbelt pretensioners fire. It also monitors the entire system and shows faults via the airbag warning light.

The control unit also works out of sight, even when you do not notice the process at all.

In the event of an accident, the unit creates crash data and locks itself.

Why does the control unit 95910-2T110 fail?

Stored crash data is the most common cause, even if no airbag was triggered in the accident; a normal diagnostic tool cannot erase it. Further causes are ageing electronic components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes from a weak battery or a jump start.

Airbag24 erases the crash data during the repair, so that point is taken care of.

Whether any of the other causes is present is only clarified by an inspection.

How can you tell that the 95910-2T110 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently when the control unit has found a fault. At the same time, a fault message, a lack of connection to the diagnostic tool or a fault memory that cannot be cleared may occur. In that case, airbags and seatbelt pretensioners may not deploy in an emergency.

This warning is a signal you should not ignore.

A fault memory that cannot be cleared also deserves a precise clarification.

Which vehicles is the 95910-2T110 fitted in?

The 95910-2T110 is fitted in these vehicles: Kia Optima TF (2010-2015).

The list shows the vehicles recorded for this part number.

• Kia Optima TF (2010-2015)

You should compare the label with this page so that you can be sure you have the correct unit in front of you. Also have the fault memory read out: only that result shows whether the control unit is defective or whether a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 692002T010, 95910-2G400, 95910-D5000, 95910-D5500.

How does the repair of the 95910-2T110 work?

First read out the fault memory and attach the log, then disconnect the battery and only then remove the control unit. Afterwards, create a repair order online and send the unit off well packed. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the unit on the test bench, repairs or replaces defective components, erases the crash data and carries out a function test. The unit is then returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2T110 get to Airbag24?

You arrange the shipping yourself as a parcel, or via a UPS collection that you can book for an extra charge. After the repair, UPS brings the unit back to you.

Pack the printed repair order into the parcel and pack the control unit so that it is shock-resistant.