Airbag control unit with part number 95910-2T210

What does the airbag control unit 95910-2T210 do?

The airbag control unit 95910-2T210 belongs to the restraint system (SRS) of Kia. It evaluates the signals from the crash sensors, selects the airbags and seatbelt pretensioners for triggering in an emergency, and monitors the system continuously.

The selection takes place within fractions of a second. The unit shows a fault via the airbag warning light in the instrument cluster.

After an accident, it stores crash data and then locks itself.

Why does the control unit 95910-2T210 fail?

The most common cause with the 95910-2T210 is crash data from an accident that remains stored even if no airbag has triggered. A standard diagnostic tool cannot erase it. Other causes are ageing components, cold solder joints, moisture, corrosion on plug connections and voltage spikes.

Such data can only be removed by an intervention that Airbag24 carries out as part of the repair. A vehicle after an accident therefore needs a careful check of the control unit.

Ageing components and cold solder joints develop over time. Moisture and corrosion attack the plugs, and voltage spikes occur, for example with a weak battery or during jump-starting.

How can you tell that the 95910-2T210 is defective?

A fault in the 95910-2T210 is indicated by an airbag warning light in the instrument cluster that stays on permanently or intermittently, an error message there, a diagnostic tool without a connection to the control unit, and a fault memory that cannot be cleared.

In an emergency, airbags and seatbelt pretensioners may then possibly not trigger. The warning light should therefore not be overlooked.

The display itself reports the fault, which is exactly what it is designed for.

• Airbag warning light, permanently or intermittently
• Error message in the instrument cluster
• No connection to the control unit via the diagnostic tool
• Fault memory cannot be cleared

Which vehicles is the 95910-2T210 fitted in?

The control unit 95910-2T210 is fitted in these vehicles: Kia Optima TF (2010-2015).

The following vehicles are assigned to this part number.

• Kia Optima TF (2010-2015)

Compare the part number on the label of the removed unit with this page. This only ensures that the unit is the right one. Beforehand, have the fault memory read out, because only this result shows whether the control unit is faulty or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 692002T010, 95910-2G400, 95910-D5000, 95910-D5500.

How does the repair of the 95910-2T210 work?

First you have the fault memory read out and enclose the log. Then you disconnect the battery and only afterwards remove the control unit 95910-2T210. Processing at Airbag24 normally takes 3–4 working days.

Then you create a repair order online and send the unit in well packed. Airbag24 checks it on the test bench, repairs defective components, erases the crash data and carries out a function test.

After that, your own unit comes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2T210 get to Airbag24?

You can send the control unit 95910-2T210 in as a parcel or have it collected by UPS for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Enclose the printed repair order in the parcel, and pack the unit shock-resistant.