Airbag control unit with part number 95910-2T410

What does the airbag control unit 95910-2T410 do?

The 95910-2T410 is the airbag control unit of the restraint system (SRS) for Kia. It processes the readings from the crash sensors, decides in an emergency within milliseconds whether the airbags and seatbelt pretensioners are triggered, and monitors the system continuously. After an accident it locks itself.

In doing so, the unit registers faults in the system and shows them via the airbag warning light. The evaluation is based on several sensors working together, not on a single signal.

After an accident, the unit also stores crash data, which remains in the memory.

Why does the control unit 95910-2T410 fail?

A failure of the 95910-2T410 can be caused by crash data stored after an accident, even if no airbag was triggered. A normal diagnostic tool cannot erase this crash data.

The fault therefore persists as long as the data remains in the memory. This also applies when no abnormality can be seen on the vehicle any more.

In addition, there are causes from the electronics. Aged components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, for example with a weak battery or after jump-starting, can also lead to a failure.

How can you tell that the 95910-2T410 is defective?

A defect in the 95910-2T410 shows up as the airbag warning light, which lights up permanently or intermittently, as a fault message in the instrument cluster or as a diagnostic tool that cannot establish a connection. In an emergency, the airbags and seatbelt pretensioners may then not deploy.

The airbag warning light is the one most likely to catch your eye. It is the most important warning signal in the instrument cluster. As soon as the system detects a fault, it lights up and shows that the system is not in order. A fault memory that cannot be emptied fits this picture.

However, this alone does not show that the control unit itself is defective. Only the fault memory readout confirms the finding.

Which vehicles is the 95910-2T410 fitted in?

The 95910-2T410 is fitted in these vehicles: Kia Optima TF (2010-2015).

The following vehicles are currently known for this part number:

• Kia Optima TF (2010-2015)

Before you remove the unit, have the fault memory read out. This shows whether the control unit is defective or rather a plug or a cable. Then compare the part number on the label with this information.

For the same vehicles, we also repair control units with the part numbers 692002T010, 95910-2G400, 95910-D5000, 95910-D5500.

How does the repair of the 95910-2T410 work?

First read out the fault memory and enclose the log. Then disconnect the battery, remove the 95910-2T410 and create a repair order online. Airbag24 checks the unit, replaces defective components and returns your own unit.

Pack the unit well and send it in. The work at Airbag24 then begins with the check, which covers all further steps.

On the test bench, the stored crash data is erased and a function test is carried out. Processing usually takes 3–4 working days and applies only to this work at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2T410 get to Airbag24?

You send the 95910-2T410 as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends the unit back by UPS.

Print out the repair order and put it in the parcel. The unit must be packed shock-proof.