Airbag control unit with part number 95910-2V000

What is the function of the airbag control unit 95910-2V000?

The control unit with OEM part number 95910-2V000 is the central control module (SRSCM) of the airbag system in the Hyundai Veloster JS. It continuously monitors the crash sensors, deploys the airbags and seatbelt pretensioners in the event of a collision, and stores relevant crash data in its internal memory.

Technically referred to as the “Module Assembly – Air Bag Control,” this unit processes signals from the acceleration sensors distributed throughout the vehicle. Only when the incoming data matches a predefined crash profile are the restraint systems activated.

Installed inside the vehicle cabin, this control unit serves as the brain of the passive safety system and plays a crucial role in protecting occupants.

Why does the control unit 95910-2V000 fail?

The most common cause of failure for the control unit 95910-2V000 is the storage of crash data after an accident, which triggers an electronic lockout. In addition, internal hardware defects on the circuit board can lead to malfunctions diagnosed as “internal error” or communication interruptions.

Following a collision—even if no airbags deploy—the control unit writes immutable crash data into its memory. This security measure locks the module and prevents further use until a professional reset is performed.

Electronic components on the circuit board may also fail, resulting in error codes such as “component defective” or “airbag internal error.” Causes include aging, moisture, or voltage fluctuations.

Another critical defect is communication failure, often identified by error code B1352. This code indicates a complete breakdown in data transmission between the airbag control unit (SRSCM) and other vehicle systems, pointing to an internal hardware fault.

How do you recognize a fault in the 95910-2V000?

A fault in the control unit 95910-2V000 primarily manifests as the airbag warning light (SRS lamp) remaining constantly illuminated on the instrument panel. During workshop diagnostics, errors such as “crash data stored,” “internal error,” or a complete communication failure with the control unit are detected.

The unmistakable main symptom is the red SRS warning light that fails to extinguish after engine start-up. This signals a serious malfunction in the restraint system, endangering occupant safety.

A diagnostic tool provides more precise information. Entries like “crash data stored” or errors related to specific ignition circuits (e.g., side airbags, seatbelt pretensioners) following an accident directly indicate a lockout within the control unit.

It becomes particularly critical when the control unit cannot be accessed via the diagnostic port at all. This communication breakdown, often associated with error code B1352, makes further fault analysis in the vehicle impossible and necessitates removal of the module.

In which vehicles is the 95910-2V000 installed?

The airbag control unit with original part number 95910-2V000 is specifically designed for the second-generation Hyundai Veloster (model series JS), produced between 2018 and 2022. Airbag24 offers expert repair services tailored precisely to this model.

At Airbag24, the 95910-2V000 control unit is repaired for the following vehicle:

Hyundai: Veloster JS (model years 2018–2022)

Exact matching of the part number is essential to ensure full compatibility and proper functionality of the safety system after repair.

How is the 95910-2V000 professionally repaired?

At Airbag24, the 95910-2V000 is repaired through targeted electronic restoration. Following an initial diagnosis, stored crash data is reset using specialized software. For hardware defects, faulty components on the circuit board are replaced, followed by a final test to confirm full functionality. All repairs come with a 12-month warranty.

Upon submission to Airbag24, the control unit is first scanned to determine the exact cause of the fault. It is assessed whether only crash data has been stored or if there is a deeper hardware or communication issue.

If the fault results from an accident-related lockout, a so‑called “Crash Data Reset” is performed. This safely removes crash entries from the internal memory, restoring the control unit to operational condition.

For internal faults, a circuit-board‑based diagnosis is conducted. Technicians identify and replace defective components such as voltage regulators, driver ICs, or memory chips to reinstate the original functionality.

Each repaired control unit undergoes a final functional and safety test. Only when communication is flawless and the module initializes without errors is it returned to the customer with a 12-month warranty.

What shipping options are available at Airbag24?

For a repair at Airbag24, you can send your defective control unit free of charge or arrange for a UPS pickup from your preferred location. After refurbishment, return shipping is available either via free standard UPS delivery or faster express options, which also include cash-on-delivery.

Returning your removed control unit is straightforward. You can either take the package to the post office yourself or use UPS’s convenient pickup service, which collects the package directly from your address.

Upon completion of the repair, Airbag24 offers free return shipping via standard UPS delivery.

For urgent cases, UPS express shipping is available. Both standard and express shipping can be combined with the cash-on-delivery payment option.

In addition, you have the option to pick up the repaired control unit in person directly at Airbag24.