Airbag control unit with part number 95910-2V010

What does the airbag control unit 95910-2V010 do?

Within the vehicle, the airbag control unit 95910-2V010 processes the readings from the crash sensors and decides within milliseconds in a collision which airbags and seatbelt pretensioners to trigger. It thus controls the restraint system (SRS) of Hyundai and monitors it continuously during operation.

Every fault it detects is passed on via the airbag warning light in the instrument cluster and stored in the fault memory. This keeps faults traceable.

After an accident the unit records crash data and locks itself. Keep this state in mind whenever a warning appears.

Why does the control unit 95910-2V010 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered. Other causes are aged components, cold solder joints, moisture and corrosion on plug connections, and voltage spikes, which occur for example with a weak battery or jump-starting.

A standard diagnostic tool cannot get rid of this data. Airbag24 erases the crash data during the repair.

Which of these causes applies to your unit can only be established during the examination.

How can you tell that the 95910-2V010 is defective?

The airbag warning light in the instrument cluster stays on permanently or intermittently, a fault message appears in the instrument cluster, the diagnostic tool gets no connection to the control unit, or the fault memory cannot be cleared. In that case, airbags and seatbelt pretensioners may fail to trigger in an emergency.

The warning light shows when the control unit has found a fault. With this one in particular, it is worth not waiting but having the fault memory read out promptly.

The same applies if the diagnostic tool does not communicate with the control unit. You should also take this finding seriously.

Which vehicles is the 95910-2V010 fitted in?

The 95910-2V010 is fitted in these vehicles: Hyundai Veloster FS (2011-2018). The list is based on the data available to us.

This overview shows which vehicles are known to us for this part number:

• Hyundai Veloster FS (2011-2018)

Use the label on the removed unit to match the part number and identify the correct unit. Whether it is defective, or whether a plug or a cable is causing the fault, is shown by the fault memory. For this reason, have it read out before removal.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V010 work?

First have the fault memory read out, then disconnect the battery and remove the control unit. Afterwards, create the repair order online, enclose the protocol and send in the unit, packed well.

At Airbag24 the unit is checked on the test bench, defective components are replaced, the crash data is erased and a function test is run. The check normally takes 3–4 working days.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V010 get to Airbag24?

You send the control unit in a parcel, or you book a UPS collection for an extra charge. UPS takes care of the return after the repair.

The printed repair order is enclosed with the parcel, and the control unit must be packed shock-proof.