Airbag control unit with part number 95910-2V050

What does the airbag control unit 95910-2V050 do?

The airbag control unit 95910-2V050 controls the SRS restraint system of Hyundai. In a collision, it calculates from the signals of the crash sensors within milliseconds which airbags and seatbelt pretensioners fire. It monitors the condition of the system permanently, and faults appear via the airbag warning light.

Between events, the control unit keeps working unobtrusively. It checks the connected components at fixed intervals and records deviations in the fault memory, which a workshop can read out later.

An accident leaves traces in the control unit: it stores crash data and then locks itself.

Why does the control unit 95910-2V050 fail?

The most common cause is crash data that remains in the memory after an accident, even when no airbag has fired. A commercially available diagnostic tool does not make it disappear. Added to this are ageing electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or jump starting.

A vehicle that shows no external damage can still become conspicuous. The reason lies in the unit itself, because the crash data sits where a diagnostic tool cannot write.

The other causes arise gradually. Electronic components age, solder joints can give way with temperature changes, and moisture or corrosion impair the contact at plug connections.

How can you tell that the 95910-2V050 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently, a fault message appears in the instrument cluster, the diagnostic tool receives no connection to the control unit, and the fault memory cannot be cleared. With such signs, airbags and seatbelt pretensioners may possibly not trigger in an emergency.

The warning light signals a detected fault in the restraint system, regardless of whether the vehicle otherwise runs normally. It is therefore the most important hint you should heed.

The message in the instrument cluster only says that something is wrong. Whether the control unit itself is affected is determined only by looking at the fault memory.

Which vehicles is the 95910-2V050 fitted in?

The 95910-2V050 is fitted in these vehicles: Hyundai Veloster FS (2011-2018).

The list below names the vehicles that Airbag24 assigns to this part number.

• Hyundai Veloster FS (2011-2018)

Compare the part number on the label of the removed unit with this page. This only establishes that you have the matching unit. Have the fault memory read out before you remove anything, because this log shows whether the control unit is defective or whether a plug or cable lies behind it.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V050 work?

You have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit. Afterwards, create a repair order online and send the unit in. Processing at Airbag24 usually takes 3–4 working days.

Airbag24 checks the control unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. Afterwards your own unit goes back to you.

This sequence must be observed before the unit leaves the vehicle. The 3–4 working days apply only to checking, repairing and testing at Airbag24.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V050 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. Airbag24 sends the repaired unit back to you by UPS.

Pack the printed repair order along with the unit, and pack the unit shock-proof.