Airbag control unit with part number 95910-2V100

What does the airbag control unit 95910-2V100 do?

The airbag control unit 95910-2V100 is the control unit of the restraint system (SRS) for Hyundai. It processes the signals from the crash sensors and decides within milliseconds in an accident which airbags and seatbelt pretensioners are triggered.

In addition it checks the system for faults during operation. If a fault is detected, the device shows it via the airbag warning light in the instrument cluster.

After an accident the control unit stores crash data and locks itself. The lock is lifted only by a repair.

Why does the control unit 95910-2V100 fail?

The most common cause is crash data stored after an accident, even if no airbag has triggered, and a normal diagnostic tool cannot erase it on the 95910-2V100. Other causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes, for example from a weak battery or a jump start.

The crash data remains in the memory until it is erased during a repair. Airbag24 takes over this erasure, and you have nothing to prepare for it.

The remaining causes relate to ageing, moisture at the connectors and voltage spikes in the vehicle electrical system. Components change over time, and solder joints can go cold or lose contact.

How can you tell that the 95910-2V100 is defective?

The airbag warning light in the instrument cluster lights up permanently or intermittently. In addition an error message appears in the instrument cluster, and the diagnostic tool finds no connection to the control unit 95910-2V100.

A fault memory that cannot be cleared also belongs to these signs. One of them alone is reason enough to have the system examined.

In an emergency, airbags and seatbelt pretensioners may then not trigger. Therefore have the fault clarified promptly.

Which vehicles is the 95910-2V100 fitted in?

The airbag control unit 95910-2V100 is fitted in these vehicles: Hyundai Veloster FS (2011-2018). The part number on the label of the removed unit remains decisive.

The following overview lists the vehicles for this part number.

• Hyundai Veloster FS (2011-2018)

You can compare the label after removal; this only confirms the right unit. Have the fault memory read out beforehand, because it alone shows whether the control unit is defective or whether a connector or cable causes the problem.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V100 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and only then remove the control unit 95910-2V100. Processing at Airbag24 usually takes 3–4 working days.

Pack the unit well and create the repair order online before you send it in.

Airbag24 tests the unit on the test bench, replaces defective components, erases stored crash data and carries out a functional test. Afterwards your own unit goes back to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V100 get to Airbag24?

You send the control unit 95910-2V100 as a parcel or book a UPS collection for an extra charge. Airbag24 returns the unit by UPS after the repair.

Enclose the printed repair order in the parcel and pack the unit shockproof.