Airbag control unit with part number 95910-2V150

What does the airbag control unit 95910-2V150 do?

The airbag control unit 95910-2V150 is the control unit of the restraint system (SRS) in Hyundai. It monitors the sensors, decides in an accident whether airbags and seatbelt pretensioners are triggered, and stores crash data after an accident.

Faults are reported via the airbag warning light in the instrument cluster. During this the unit continuously checks the system's connections.

After an accident the unit additionally locks itself; the lock is lifted only by the repair.

Why does the control unit 95910-2V150 fail?

Stored crash data are the most common cause of a failure of the 95910-2V150, even if no airbag has triggered. A normal diagnostic tool does not erase them. Other causes include aged electronic components, cold solder joints, moisture with corrosion at plug connections, and voltage spikes.

Airbag24 removes the crash data during the repair. This is a fixed part of the process.

Aged components and corrosion alter the electronics slowly. Voltage spikes, for example from a weak battery or jump-starting, act suddenly.

How can you tell that the 95910-2V150 is defective?

A defect in the 95910-2V150 is shown by the airbag warning light in the instrument cluster, which lights up permanently or intermittently.

Typical signs at a glance:

• airbag warning light lights up permanently or intermittently
• error message in the instrument cluster
• diagnostic tool receives no connection to the control unit
• fault memory cannot be cleared

In an emergency airbags and seatbelt pretensioners may then fail to trigger. These warnings should therefore be taken seriously.

Which vehicles is the 95910-2V150 fitted in?

Before removal, check with the vehicle list whether the unit fits. The 95910-2V150 is fitted in these vehicles: Hyundai Veloster FS (2011-2018).

The following vehicles are recorded for this part number:

• Hyundai Veloster FS (2011-2018)

Compare the part number on the label of the unit with this page. This only confirms that it is the correct unit, and nothing more.

Also have the fault memory read out. Only this record shows whether the control unit is defective or whether a plug or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V150 work?

Have the fault memory read out and enclose the log. Then disconnect the battery and then remove the 95910-2V150. Next create a repair order online and send the unit in packed. For testing, repairing and checking at Airbag24, 3–4 working days are usually needed.

Airbag24 tests the unit on the test bench, replaces defective components, erases the stored crash data and carries out a function test. The unit then goes back to you repaired.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V150 get to Airbag24?

You send the 95910-2V150 as a parcel or book a UPS collection for an extra charge. After the repair Airbag24 returns the unit by UPS.

The printed repair order belongs in the parcel. The control unit is packed shock-proof.