Airbag control unit with part number 95910-2V200

What does the airbag control unit 95910-2V200 do?

The airbag control unit 95910-2V200 controls the restraint system (SRS) of Hyundai. It evaluates the signals from the crash sensors, decides in a crash which airbags and seatbelt pretensioners are triggered, and monitors the system continuously. It indicates detected faults via the airbag warning light.

The decision to trigger must be made within fractions of a second, otherwise the protection comes too late. To do this, the unit constantly compares the measured values with stored limit values and at the same time checks the wiring of the system.

After an accident, the control unit stores crash data and then locks itself.

Why does the control unit 95910-2V200 fail?

The most common cause is stored crash data from an accident, even if no airbag has triggered. A normal diagnostic tool cannot delete this data. Further causes are aged electronics, cold solder joints, moisture at plug connections and voltage spikes.

Crash data remains in the unit even if no airbag has opened, and this is exactly where the repair begins. The other causes include ageing of components, solder joints that become brittle over time, and moisture and corrosion at plug connections.

Voltage spikes, for example from a weak battery or a jump-start, can also affect the electronics. Which of these causes is present is shown only by the examination of the unit.

How can you tell that the 95910-2V200 is defective?

A defect shows up as the airbag warning light in the instrument cluster, which lights up permanently or intermittently. In addition, there are error messages in the instrument cluster, a lack of connection to the diagnostic tool and a fault memory that cannot be cleared.

Typical signs are:

• Airbag warning light permanently or intermittently on
• Error message in the instrument cluster
• Diagnostic tool receives no connection to the control unit
• Fault memory cannot be cleared

If any of these signs is present, airbags and seatbelt pretensioners may not be able to trigger in an emergency. Please have the finding checked promptly.

Which vehicles is the 95910-2V200 fitted in?

The assignment applies to Hyundai. The control unit 95910-2V200 is fitted in these vehicles: Hyundai Veloster FS (2011-2018).

The following vehicles are assigned to this control unit:

• Hyundai Veloster FS (2011-2018)

First compare the part number on the label of the removed unit with this page, so that you can see you have the correct unit in front of you. Also have the fault memory read out beforehand, because only this log shows whether the control unit itself is affected or a plug or cable is the cause.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V200 work?

First have the fault memory read out and enclose the log. Then disconnect the battery and remove the control unit. Afterwards create a repair order online and send the unit well packed. Processing at Airbag24 generally takes 3–4 working days and covers only inspection, repair and testing.

Airbag24 inspects the unit on the test bench and replaces defective components. The stored crash data is deleted, followed by a function test, and your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V200 get to Airbag24?

You send the unit as a parcel or book a UPS collection for an extra charge. After the repair, Airbag24 sends it back to you by UPS.

Place the printed repair order in the parcel and pack the control unit shock-proof.