Airbag control unit with part number 95910-2V250

What does the airbag control unit 95910-2V250 do?

The airbag control unit 95910-2V250 is the control unit of the restraint system (SRS) in the Hyundai. It processes the signals of the crash sensors and, in a crash, decides within milliseconds on the triggering of the airbags and seatbelt pretensioners.

It monitors the system continuously and reports faults via the airbag warning light in the instrument cluster.

After a crash, it creates crash data and locks itself. A repair is the only way to lift the lock.

Why does the control unit 95910-2V250 fail?

Stored crash data after an accident is the most common cause, even if no airbag has deployed. A normal diagnostic tool cannot make it disappear. Further causes are aged electronic components, cold solder joints, moisture and corrosion at plug connections, and voltage spikes.

The crash data stays in the control unit until it is removed. Airbag24 erases it as part of the repair.

The other causes tend to be long-term. Electronic components age, solder joints become brittle over time, and moisture promotes corrosion. Voltage spikes arise, for example, with a weak battery or a jump-start.

How can you tell that the 95910-2V250 is defective?

The airbag warning light in the instrument cluster comes on permanently or intermittently, and a fault message appears. The diagnostic tool finds no connection to the control unit, and the fault memory cannot be cleared. In an emergency, airbags and seatbelt pretensioners may then fail to deploy.

Further signs include:

• the warning light does not go out after starting
• the instrument cluster repeatedly displays an airbag message
• no connection can be established with the diagnostic tool
• stored faults do not disappear after clearing

Which vehicles is the 95910-2V250 fitted in?

The 95910-2V250 is fitted in these vehicles: Hyundai Veloster FS (2011-2018). The assignment applies to the brand Hyundai.

Here follows the list of vehicles that are stored for this part number.

• Hyundai Veloster FS (2011-2018)

Compare the part number on the label of the removed unit with this page. That ensures that you have the correct unit. Whether the control unit is defective, or whether a plug or cable is the cause, is shown only by the fault memory, which you have read out beforehand.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V250 work?

You first have the fault memory read out and enclose the log. Then you disconnect the battery and remove the control unit. Online, you then create the repair order and send in the unit, well packed.

Airbag24 checks the unit on the test bench, rectifies the faults in the affected components, erases the stored crash data and carries out a function test. Processing at Airbag24 usually takes 3–4 working days.

After that, your unit is returned to you. Our repairs come with 2 years' statutory liability for defects. The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V250 get to Airbag24?

You send the unit as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns it to you by UPS.

Put the printed repair order into the parcel and pack the control unit shock-proof.