Airbag control unit with part number 95910-2V300

What does the airbag control unit 95910-2V300 do?

The control unit 95910-2V300 is the central control unit of the SRS restraint system for Hyundai. It measures through the crash sensors what happens during an impact and determines within milliseconds which airbags and seatbelt pretensioners fire.

It checks the entire system continuously. If a fault occurs, it reports it via the airbag warning light in the instrument cluster.

After an accident, the unit stores crash data and then locks itself.

Why does the control unit 95910-2V300 fail?

The most common cause with the 95910-2V300 is crash data stored in memory after an accident, even if no airbag was triggered. Further causes are ageing components, moisture and corrosion at plug connections, and voltage spikes.

Crash data cannot be erased with a standard diagnostic tool. Airbag24 removes it during the repair.

Other causes include, among others:

• ageing electronic components
• dry solder joints
• moisture and corrosion at plug connections
• voltage spikes from a weak battery or a jump start

How can you tell that the 95910-2V300 is defective?

On the 95910-2V300, the airbag warning light in the instrument cluster stays on permanently or intermittently. In addition, a fault message appears, the diagnostic tool has no connection to the control unit, or the fault memory cannot be cleared.

These signs mean that the airbags and seatbelt pretensioners may not deploy in an emergency. The warning light makes the fault visible, so it must not be ignored.

A deleted entry is not the same as a repaired fault. Only reading out the memory by a specialist workshop shows which messages are stored.

Which vehicles is the 95910-2V300 fitted in?

The control unit 95910-2V300 is fitted in these vehicles: Hyundai Veloster FS (2011-2018). If your vehicle is among them, the unit is listed for your model.

The list shows the vehicles we have assigned to this control unit.

• Hyundai Veloster FS (2011-2018)

Compare the part number on the label of the removed unit with this page. This ensures that you have the correct unit.

Have the fault memory read out beforehand. The result shows WHETHER the control unit is defective or whether a connector or a cable is the cause.

For the same vehicles, we also repair control units with the part numbers 28400435, 95910-2V030, 95910-2V350, 95910-K9100.

How does the repair of the 95910-2V300 work?

First have the fault memory read out and enclose the log. Then disconnect the battery, remove the control unit 95910-2V300 and create a repair order online. Pack the unit well and send it in.

The sequence is for your safety. The control unit may only be removed after the memory has been read out and the battery disconnected.

Airbag24 checks the unit on the test bench, replaces defective components, erases the crash data and carries out a functional test. Processing usually takes 3–4 working days before your own unit is returned to you.

Our repairs come with 2 years' statutory liability for defects.

The repaired control unit comes back with all vehicle data and is ready for use as soon as it is refitted — no coding or programming is required.

How does the control unit 95910-2V300 get to Airbag24?

The control unit 95910-2V300 comes to us as a parcel, or you book a UPS collection for an extra charge. After the repair, Airbag24 returns the unit to you by UPS.

Pack the printed repair order into the parcel. Pack the unit so that it is shockproof.