Airbag control unit with part number 95910-2V350

What is the function of the airbag control unit 95910-2V350?

The airbag control unit with part number 95910-2V350 is the central control unit (SRS ECU) for the passive safety system in the Hyundai Veloster FS (2011–2018). It continuously analyzes data from the acceleration and yaw rate sensors to precisely deploy the airbags and seatbelt pretensioners at the right moment in the event of a crash.

As the “brain” of the restraint system, this module is responsible for monitoring the entire chain of safety components. It ensures that all sensors, airbags, and seatbelt pretensioners are operational. In case of a system malfunction or after an accident, it activates the airbag warning light on the instrument cluster to alert the driver.

This control unit is specifically designed for the first-generation Hyundai Veloster (FS) and can also serve as a replacement for the similar part number 95910-2V300. Its proper functioning is critical for occupant safety.

Why does the control unit 95910-2V350 fail?

The most common cause of failure for the control unit 95910-2V350 is the storage of crash data following an accident. Additional defects arise from the failure of internal electronic components or moisture damage, which leads to short circuits on the circuit board and disrupts system communication.

After an airbag deployment—such as the knee airbag—the control unit locks the memory and stores non-erasable crash data. This is a manufacturer‑specified safety measure intended to prevent reuse without professional repair. Conventional diagnostic tools can no longer erase this data.

Another frequent cause is hardware defects on the circuit board. These may manifest as the specific error code B1206 (component defective), which indicates an internal component fault in models like the Veloster FS or the Hyundai i30. Such defects are purely electronic and require component‑level repair.

How do you recognize a defect in the 95910-2V350?

A defect in the airbag control unit 95910-2V350 primarily shows up as a permanently illuminated airbag warning light on the dashboard that does not turn off even after starting the engine. Often, communication between the control unit and a diagnostic tool is also lost, making fault analysis difficult.

The most obvious symptom is the constantly lit airbag indicator light. It signals a critical fault in the restraint system and suggests that the airbags might not deploy in the event of a crash.

Another clear sign is when the control unit reports stored crash data that cannot be erased after an accident. Workshops then determine that the module is locked and must be replaced or repaired.

Additionally, diagnostic tools may lose access to the control unit altogether. It fails to respond to queries, preventing the reading of error codes such as the specific B1206—even though the warning light remains active.

In which vehicles is the control unit 95910-2V350 installed?

The airbag control unit with part number 95910-2V350 was developed specifically for the first-generation Hyundai Veloster (model series FS). At Airbag24, we repair this control unit for the following models and series, including variants equipped with 1.6 GDI or T-GDI engines.

At Airbag24, the 95910-2V350 control unit is refurbished for the following model:

Hyundai: Veloster (model series FS, manufactured from 2011 to 2018)

How is the 95910-2V350 professionally repaired?

Professional repair of the 95910-2V350 includes safely erasing stored crash data, diagnosing, and replacing faulty electronic components on the circuit board. After refurbishment, the control unit undergoes testing on a test bench to ensure full functionality. All repairs come with a 12-month warranty.

Upon submission to Airbag24, the control unit follows a standardized process. First, an initial inspection verifies the reported fault. Technicians read the internal memory to pinpoint the root cause—whether it’s crash data or a hardware defect.

Next, the stored crash data is completely and securely erased using specialized programming equipment. For hardware faults such as error code B1206, defective components on the circuit board are identified and replaced with new, high‑quality parts.

Finally, a comprehensive functional test confirms that the control unit communicates flawlessly and processes all system parameters correctly. Once reinstalled, the repaired unit is immediately ready for use (plug-and-play).

What shipping options does Airbag24 offer?

Airbag24 provides flexible and secure shipping solutions. For outbound shipments, you can either drop off the package yourself or arrange a convenient UPS pickup at your preferred location. For returns, we offer free standard shipping, express options, and cash-on-delivery services.

To send us your removed control unit, you have two choices: pack it yourself and ship it to us, or use our convenient UPS pickup service, which arranges for the package to be collected directly from your location.

After the repair is completed, we offer several return shipping options:

- UPS Standard Shipping (free)

- UPS Express Shipping

- UPS Standard Shipping with Cash on Delivery

- UPS Express Shipping with Cash on Delivery

- In-store pickup at our workshop